When connecting to the PCoIP Graphics Agent I only get 1 display when I have 2 or more connected
Problem When connecting to a PCoIP Graphics Agent installed on a machine with an Nvidia GRID K340, Nvidia GRID K520, Nvidia GRID M series or above GPU I only get one display but the PCoIP Zero Client or PCoIP Software Client has multiple displays …
Why can I not see the mouse cursor when using PCoIP HP Anyware installed on Windows 8.1 or Windows 10 bare metal?
Problem When using PCoIP HP Anyware to connect to Windows 10 running on bare metal (operating system installed directly on the computer with no virtualization), the cursor is not visible.   Cause When Windows 10 do not detect a locally attached mouse, …
Why does touchscreen calibration not work with a resolution other then native resolution?
Answer: Calibration for touchscreens via Teradici PCoIP firmware is designed to work from the OSD in native resolution with elo branded touch screens. To calibrate from a different resolution other than native, the elo device must be bridged and the elo …
How do I change the image quality properties of a PCoIP Remote Workstation Card?
Review the below table to understand where to change the image quality properties in a remote workstation environment. This information applies to sessions between PCoIP Zero Clients and a PCoIP Remote Workstation Card (i.e. host card). If you are using a …
Why is my display not working correctly when using an adaptor attached to my OEM supplied cable?
Problem After purchasing a HP Anyware product you discover the cable shipped with the HP Anyware product does not have the necessary Video/Display connector to interface with your GPU or monitor. To complete the connection an adaptor is used to change the …
Can I connect a local monitor to computer that has PCoIP Remote Workstation Card or HP Anyware Installed?
Although you may have enough display heads on your GPU to connect local monitors, it is not a supported configuration when using a PCoIP Remote Workstation Card or HP Anyware. Connecting an additional local monitor may cause the following issues: Blank …
Why does my screen jitter or stutter, and scroll bars appear on the PCoIP Software client window after connecting to a PCoIP Remote Workstation Card?
Answer: This occurs when a software client is being used on a laptop with the display configured to operate in non-native mode. The EDID information found in some laptops only include timing information for the native display resolution. If a non-native …
Why does the dual-link DVI monitor connected to my PCoIP Zero Client not display properly?
Check your DVI cable, it may not be dual-link capable. Dual-link cable ends have all of the pins populated whereas single-link cables are missing 6 pins. These pins carry the extra information to allow up to 2560 x 1600 resolution. Some monitors will …
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support HDMI connections?
PCoIP zero clients only come with the following connections: sVGA DVI (single and dual link) Display Port (1.1a) HDMI is not a supported connector type on PCoIP Zero Clients. You can purchase Display Port or DVI to HDMI cables and adapters however you may …