Can a PCoIP Remote Workstation Card be brokered by VMware Horizon View?
A PCoIP Remote Workstation Card (host card) can be brokered by VMware View 4.5 and newer. This way, the host can be accessed by either a PCoIP Zero Client or the VMware View software client. Refer to  PCoIP Remote Workstation Card 4.9.0 Administrators' …
How much latency does PCoIP technology add to the remote system?
The latency added by PCoIP technology to a remote system is related to the time to encode (compression) and decode (decompression) for the PCoIP protocol, which depends on the implementation. Total end-to-end latency is determined by OS latency and …
How do I identify if enhanced logging is enabled on PCoIP Zero Clients and PCoIP Remote Workstation cards?
Answer: Since firmware 4.0.0, enhanced logging has been identifiable in events logs on PCoIP Zero Clients and PCoIP Remote Workstation Cards (also known as a host card). Event log entries of no module selected indicate enhanced logging is not activated …
What are the DNS SRV records supported by PCoIP Zero Client and PCoIP Remote Workstation Card firmware?
There are four different DNS SRV records that are supported in firmware. pcoip-bootstrap  (PCoIP Management Console 2.x and newer, Firmware 5.x and newer) - The firmware uses this DNS SRV record along with other records to complete the bootstrap process …
Host Performance Health Check - Diagnostics and troubleshooting guide
Summary To receive a detailed host diagnostic report, create a host agent  support/log file bundle  and then submit this bundle to the PCoIP  health check   tool.  Once the files are submitted, it will take 5-10 minutes to produce a detailed report.  The …
HP Anyware Software Client cannot connect to PCoIP Remote Workstation Card
Scenario : Trying to connect to a PCoIP remote workstation card ( RWC ) using the HP Anyware software client fails to connect. User receives the following message... In this case the software client version can be any release however for my testing I am …
Displays
After completing this unit, you’ll be able to: Understand the different display configurations. Understand the supported resolutions 20 mins With PCoIP, you can configure several display settings as described below.   Display Resolutions PCoIP supports …
Getting blank screen or "source signal on other port" when connecting from zero client to VMware Horizon
Scenario: When using a PCoIP zero client connecting to VMware VM running Horizon Agent 8.2 if the VMware remote console is open while user is in session the zero client will display a blank screen or you may receive a message "source signal on other …