Release Notes
Software Client for Windows 22.07
The PCoIP Software Client for Windows 22.07 introduces the following features and enhancements:
-
HP Anyware: With this release, Teradici CAS is now HP Anyware. HP Anyware brings Teradici CAS and ZCentral Remote Boost together into a single solution, starting with enhancements for the collaboration feature.
-
Collaboration Enhancements: There are two major improvements to collaboration in this release:
-
The PCoIP Client for Software Client for Windows now supports GPU Offload and Auto Offload PCoIP Ultra modes in collaboration sessions, if the connected PCoIP agent also supports them.
-
Mouse visibility has also been added in this release; Guest collaborators can now see the host's cursor movements during a collaboration session.
See Collaboration for more information on these enhancements.
-
-
URI-launched session configuration improvements: When launching the Software Client for Windows via a URI, you can now use most of the same properties available to command-line launches in your JWT payload. For more information, see Command Line Parameters.
USB driver now installs correctly.
This fix improves the error handling in the USB driver installer and uninstaller, which now correctly handles situations where the driver did not uninstall.
When the USB driver is updated the client machine must be rebooted before USB functionality may be used.
Keyboard and Mouse Freeze when Connected to Remote Workstation Card in Windowed Mode
Keyboard and Mouse can freeze when connected to a Remote Workstation Card while the Soft Client is in windowed mode.
If this occurs, switch the client to full-screen mode to reestablish Keyboard and Mouse functionality.
Audio does not work when connected to a Remote Workstation Card
Audio in/out is not available when the host is a Remote Workstation Card
Use PCoIP Client version 21.07 if audio functionality is required with the Remote Workstation Card.
USB driver conflicts with NoMachine software
The USB driver installed with the PCoIP Software Client for Windows has a driver conflict with the USB driver used by the NoMachine remoting software.
Remove the NoMachine software before installing the PCoIP client.
Difficulty in exceeding 150Mbps throughput on Windows
On an otherwise clean, high-bandwidth capable network, a Windows client may experience sufficient PCoIP packet loss to limit throughput to approximately 150Mbps.
Windows Update and/or NIC driver updates can reconfigure settings such that UDP throughput is affected. Always ensure the latest drivers from the manufacturer are being used, as well as ensure that Flow Control and Interrupt Moderation are enabled for the NIC used to establish any PCoIP sessions. (These can be found the NIC's Advanced Properties tab within Windows' Device Manager.)
Bridged USB devices disconnected when switching to Windowed Mode
When the client has more than one monitor, switching from Full-screen to Windowed mode will disconnect all bridged USB devices.
Incompatibility between PCoIP Software Client for Windows and virtual KVM application Synergy
There is a known incompatibility between PCoIP Software Client for Windows and the virtual KVM application Synergy (http://symless.com/synergy). The Synergy application can interfere with the keyboard handling of the PCoIP client and cause sometimes a single or no keypresses to be transmitted to the PCoIP agent. This issue was observed with Synergy 2016 and may be present with other Synergy releases.
Disable Synergy when using the PCoIP client.
Wacom Intuos Pro and Intuos 5 tablets cannot be bridged
These tablets work as a pointing device when a session is not active, and when the tablet is not bridged while a session is active. When the tablet is bridged, the device manager application running on the remote host displays a warning icon next to the tablet and the tablet does not work.
Intuos PTH-660 and PTH-860 tablets are not impacted by this issue.
Avoid bridging Intuos Pro and Intuos 5 tablets.
Cancelling large USB file transfer fails
Cancelling a large file from being copied to, or from, a USB flash drive while bridged in PCoIP Software Client fails to function. The file will continue to copy until finished.
Allow operations on USB devices to complete prior to disconnecting the session.
SanDisk Cruzer USB devices do not work if the PCoIP session is disconnected while a file transfer is in progress
SanDisk Cruzer USB devices do not successfully re-bridge after the PCoIP session was disconnected during an active file transfer.
Avoid disconnecting the device or the session while file transfers are in progress. If a disconnection does occur while transfers are in progress, physically unplug and reconnect the device to the client. If the device fails to mount as a mass storage device after the previous step:
- Find the SanDisk Cruzer in Device Manager.
- Right-click on the device and select Uninstall.
- After uninstall completes, physically unplug and reconnect the device to the client.
USB keyboards do not work in bridged mode
Keyboards do not work when bridged. This affects both Windows and macOS PCoIP Software Client.
Do not bridge the keyboard. Keyboards function correctly when locally terminated.
Client window size is not remembered when crossing multiple monitors
When stretching the client window across multiple monitors, client window size is not remembered for session reconnects.
Mouse out of sync due to scaling in dual high-resolution displays
Connecting a PCoIP Software Client session with dual high-resolution displays in full-screen mode (2560x1600 for example) to a hard host that does not support high-resolution displays may result in unexpected behavior. For example, one or both displays may be scaled to single link DVI resolutions without the client also scaling, resulting in unsynchronized mouse movement.
Set client desktop to single link DVI resolutions. Alternatively, upgrade host GPU to support dual-link resolutions (Tera2 hosts only)
Audio input in PCoIP Software Client with PCoIP Remote Workstation Card does not work
When in session with a PCoIP Remote Workstation Card, PCoIP Software Client supports audio out from the host, but not audio into the host.