Release Notes

Zero Client Firmware

Management Requirements

  • Zero Clients with firmware 17.05, 20.01 or newer are supported when managed by PCoIP Management Console 20.01 or newer. 
  • Supported browsers are Firefox, Chrome, and Microsoft Edge. Versions of the browsers tested are those that were available prior to release.
  • Web browsers must support TLS 1.2 or higher to connect to an enabled administrative web interface (AWI).
  • This release cannot be brokered using the CMI brokering protocol.

Upgrade Path Information

  • If you are upgrading your Tera2 firmware:
    • Use PCoIP Management Console 20.01 or newer to upgrade the Zero Client to firmware 20.01 or newer.
    • Use PCoIP Management Console 1.10.3 through 1.10.8 to upgrade the Zero Client to firmware 5.0 or newer.
    • The AWI can be used to upgrade a single Zero Client to any firmware version.
    • See Knowledge Base article KB 1144 for upgrade prerequisites.

Download Contents

  • This download includes an .all file for use by the Administrative Web Interface (AWI) and a .pcoip file for use by PCoIP Management Console version 2.0 and higher.
  • The .pcoip file contains either the PCoIP Zero Client firmware or Remote Workstation Card firmware specific to the component firmware that was downloaded.

Related Product Resource Locations

6.5.2

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 6.5.2 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with security updates and bug fixes. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in Release 6.5.1

PCoIP Zero Client Firmware 6.5.1 is a maintenance firmware release for PCoIP Zero Clients that contains the following updates:

  • Fix for 802.1x authentication failure (94607) found in 6.5.0.
  • Security updates.
  • Updated French translation for OneSign "Help me log in" link.

Note: only All Access subscribers are eligible to receive this release.

Compatibility 

Release 6.5 is verified with VMware Horizon 7.10. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

VMware Horizon 6.2.1 is now the minimum release required to connect with zero clients on this firmware release.

  X    

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

    X  

Release 6.5 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.8.

  X    

While mixed firmware release operation is not generally supported, this firmware release has been tested to work with Remote Workstation Cards on Remote Workstation Card firmware 5.1.

X X    

Release 6.5 is compatible with the Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had ‘Enable TLSv1.1 protocol’ enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

 

X

 

X

 

 

X

6.5.1

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 6.5.1 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with functional changes and bug fixes over release 6.5.0. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in Release 6.5.1

PCoIP Zero Client Firmware 6.5.1 is a maintenance firmware release for PCoIP Zero Clients that contains the following updates:

  • Fix for 802.1x authentication failure (94607) found in 6.5.0.
  • Security updates.
  • Updated French translation for OneSign "Help me log in" link.

Note: only All Access subscribers are eligible to receive this release.

Compatibility 

Compatibility Notes Workstation VMware Horizon Amazon WorkSpaces Teradici Cloud Access Software
Release 6.5.1 is verified with VMware Horizon 7.10. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.VMware Horizon 6.2.1 is now the minimum release required to connect with zero clients on this firmware release.   X    
PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.     X  
Release 6.5.1 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.8.   X    
While mixed firmware release operation is not generally supported, this firmware release has been tested to work with Remote Workstation Cards on Remote Workstation Card firmware 5.1.0. X X    
Release 6.5.1 is compatible with the Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had ‘Enable TLSv1.1 protocol’ enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent. X X   X
 

6.5.0

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 6.5.0 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a feature release with functional changes and bug fixes over release 6.4. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in Release 6.5

Note for 802.1x users: 802.1x users should NOT use 6.5.0 release. 802.1x users should use release 6.4.0 until further notice.

Wacom Tablet Additions

New Wacom tablet local termination with Cloud Access Software on Windows hosts.

  • Wacom Cintiq 22HD (only with Wacom driver 6.3.32-4)
  • Wacom Cintiq 22HDT
  • Wacom Cintiq 24 Pro (Support for stylus. Touch support not available at this time.)

Prefer GSC-IS default setting change

Security Updates

  • Zero Client cryptography library has been updated to the latest Mocana version.
  • Connections to Remote Workstation Card with TLS Security Mode set to Suite B now require a custom peer to peer certificate. Customers wishing not to configure a custom peer-to-peer certificate, should set TLS Security Mode to Max Compatibility.
    See Creating Custom Certificates Reference

Compatibility 

Compatibility Notes

Workstation

VMware Horizon

Teradici Cloud Access Software

Release 6.5.0 is certified with VMware Horizon 7.10. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

VMware Horizon 6.2.1 is now the minimum release required to connect with zero clients on this firmware release.

  X  

Release 6.5.0 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.9.

  X  

While mixed firmware release operation is not generally supported, this firmware release has been tested to work with Remote Workstation Cards on Remote Workstation Card firmware 5.1.0.

X X  

Release 6.5 is compatible with the Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had ‘Enable TLSv1.1 protocol’ enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

X

X

X

6.4.0

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 6.4.0 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a feature release with functional changes and bug fixes over release 6.3.1.

These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in Release 6.4

New Smart Cards for Horizon View

  • Gemalto MD830 Level 3
  • Gemalto MD830 Level 2 with Secure Messaging Enabled

Smart Card Authentication in PCoIP Broker Protocol (BETA)

Zero Client can use smart cards for authentication with Leostream broker using the PCoIP Broker Protocol.

Notes

  • The Leostream broker supports both Cloud Access Software (CAS) and Remote Workstation Cards.
  • Smart cards cannot be used for single sign-on to a workstation, this feature will be available in a future release.

Administrative Web Interface (AWI) is disabled by default

By default, the Administrative Web Interface is disabled. To enable it, please read instructions here.

SLP is disabled by default

By default, SLP discovery is disabled.

 

Compatibility 

 

Compatibility Notes Remote Workstation Card VMware Horizon  Cloud Access Software

Release 6.4.0 is verified with VMware Horizon 7.9. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

VMware Horizon 6.2.1 is now the minimum release required to connect with zero clients on this firmware release.

  X  

Release 6.4 has been tested against Imprivata OneSign 6.0 with VMware Horizon 7.8.

  X  

While mixed firmware release operation is not generally supported, this firmware release has been tested to work with Remote Workstation Cards on Remote Workstation Card firmware 5.1.0.

X X  

Release 6.4 is compatible with the Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had ‘Enable TLSv1.1 protocol’ enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card 19.05 Agent

 

X

 

X

 

X

 

 

6.3.1

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 6.3.1 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with security updates and bug fixes over feature release 6.3. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in Release 6.3.x

New Smart Cards for Horizon View

  • SafeNet AT SC650 v3.2
  • Entrust PIV 2.4.2R0
  • Oberthur/IDEMIA Cosmo V8 ID-ONE PIV 2.4.0/2.4.1

Removed AES-128 in PCoIP session

PCoIP session can only be encrypted with AES-256

Require password protection for OSD User Settings

Restrict OSD User Settings to require the Zero Client password

Low light interface

User interface can be made less bright, to accommodate low light environments.

Compatibility

Compatibility Notes Remote Workstation Card VMware Horizon  Cloud Access Software

Release 6.3.0 is verified with VMware Horizon 7.8 and 7.7. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

VMware Horizon 6.2.1 is now the minimum release required to connect with zero clients on this firmware release.

  X  

Release 6.3 has been tested against Imprivata OneSign 6.0 with VMware Horizon 7.8.

  X  

While mixed firmware release operation is not generally supported, this firmware release has been tested to work with Remote Workstation Cards on Remote Workstation Card firmware 5.1.0.

X X  

Release 6.3 is compatible with the Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had ‘Enable TLSv1.1 protocol’ enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.

Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card 19.05 Agent.

 

X

 

X

 

X

 

6.2.1

End of Availability
This release is no longer supported.

PCoIP Zero Client Firmware 6.2.1 Release Notes

Release Overview

PCoIP Zero Client Firmware 6.2.1 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with security upgrades and bug fixes over release 6.2. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in Release 6.2

Local termination for Wacom Intuos Pro Medium PTH-660, Intuos Pro Large PTH-860, Cintiq 22HDT, and Cintiq DTH-1300 tablets

Improves tablet performance in higher latency networks when connecting to any of the following hosts:

  • Linux PC's with PCoIP Host Software for Linux 4.8.0 and Remote Workstation Card with firmware 5.1 installed.
  • Linux PC's with Cloud Access Software 2.15 or later installed.
  • Windows PC's with Cloud Access Software 2.15 or later installed.

Custom certificate support for direct connections to Remote Workstation Card

Peer-to-peer connections between Zero Client and Remote Workstation Card can be secured with a user provided certificate.

Compatibility

Compatibility Notes Remote Workstation Card VMware Horizon  Cloud Access Software

Release 6.2.0 is verified with VMware Horizon 7.7. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

VMware Horizon 6.2.1 is now the minimum release required to connect with zero clients on this firmware release.

  X  

Release 6.2 has been tested against Imprivata OneSign 6.0 with VMware Horizon 7.7.

  X  

While mixed firmware release operation is not generally supported, this firmware release has been tested to work with Remote Workstation Cards on Remote Workstation Card firmware 5.1.0.

X X  

Release 6.2 is compatible with the Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had ‘Enable TLSv1.1 protocol’ enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.

Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card 19.05 Agent.

 

X

 

X

 

X

 

24.10

Current supported release General Support

Release 24.10 of the Tera2 PCoIP® Zero Clients includes:

Support for Failover Security Gateways

Version 24.10 of the Tera2 Zero Clients introduces support for session failover in a Connection Manager and Security Gateway deployment. If the primary gateway used to establish a PCoIP session fails unexpectedly, the session is automatically transferred to the next available gateway. This ensures continuity of sessions in the event of hardware failures or network disruptions.

Session failover is only available if failover gateways are configured on the machines where the Connection Manager and/or Security Gateway are installed. No additional configuration is required on the Tera2 Zero Clients.

Note: Instructions for configuring failover gateways is available in the topic "Configuring Failover Security Gateways" of the Connection Manager and Security Gateway Administrators' Guide.

Support for Increased Session Resiliency

Tera2 Zero Clients now have session resiliency of 60 seconds for connections with session failover. If a connection is terminated unexpectedly, Tera2 Zero Clients will attempt to reconnect for 60 seconds. The increased session resiliency time ensures that users can continue to work without interruption, while eliminating the need to reconnect manually.

Note: Without failover gateways, Tera2 Zero Clients will continue to have 30-second resiliency time for connections.

Compatibility

ComponentTested versions
Management ConsoleManagement Console 23.12.1 or newer
Remote Workstation Card

Remote Workstation Card Firmware 24.10

Remote Workstation Card Software 23.12

Remote Workstation Card Agent 23.12

Leostream Connection Broker

Leostream Connection Broker 8.2 with minimum TLS 1.2. Not compatible with earlier versions of the Leostream Connection Broker. 

Brokering of the Remote Workstation Card requires the installation of the Remote Workstation Card Agent.

Omnissa Horizon

VMware Horizon 8 2406, and one major version lower. Pre-certification is in progress. See pre-certified firmware releases here.

Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.

Imprivata OneSignImprivata OneSign 7.8.3 with VMWare Horizon 8.9-2406

23.12

General Support

Release 23.12 includes:

 
Deploying Firmware 23.12 or later via Management Console

Firmware versions 23.12 and later can only be uploaded and deployed by PCoIP Management Console 23.12.1 or later.  Management Console version 23.08 or earlier cannot process these firmware files, and will throw an "Exception uploading and processing file" error when an upload is attempted.

To deploy this firmware version, upgrade to Management Console 23.12.1 or higher.

MFA options can be displayed in Zero Clients

Multi-Factor Authentication options can now be displayed in Zero Clients.

Added support for STARCOS smart cards

STARCOS smart cards are now supported. For a full list of supported smart cards, see Tested Smart Card Models.

Analog audio-in can be disabled via the AWI

Analog audio input can now be disabled using the device's AWI. For more information, see Configuring Audio.

Compatibility

ComponentTested versions
Management ConsoleManagement Console 23.12.1 or newer
Remote Workstation Card

Remote Workstation Card Firmware 23.12

Remote Workstation Card Software 23.12

Remote Workstation Card Agent 23.12

Leostream Connection Broker

Leostream Connection Broker 8.2 with minimum TLS 1.2. Not compatible with earlier versions of the Leostream Connection Broker. 

Brokering of the Remote Workstation Card requires the installation of the Remote Workstation Card Agent.

VMware Horizon

Zero Client Firmware is pre-certified with VMware Horizon 8.10-2306, and one major version lower. 

Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.

Note: This KB article lists the Zero VMware Horizon versions that are supported by Zero Clients.

Imprivata OneSignImprivata OneSign 7.8.3 with VMWare Horizon 8.9-2303

23.08

Technical Guidance

Release Overview

This release maintains version parity with Remote Workstation Card firmware and includes new features, bug fixes and security updates over release 23.06. 

What's New in 23.08

Compatibility

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 23.08 has been tested with Remote Workstation Card 23.08 with Remote Workstation Card Software 23.08.

Zero Client 23.08 has been tested with Remote Workstation Card Agent 23.08.

Leostream Connection Broker

Zero Client 23.08 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware

  • Horizon: Zero Client 23.08 has been tested with VMware Horizon 8.10-2306, and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 23.08 has been tested against Imprivata OneSign 7.8.3 with VMWare Horizon 8.9-2303.

23.06.1

Technical Guidance

Release Overview

Release 23.06.1 maintains version parity with Remote Workstation Card firmware and includes bug fixes over release 23.06.0. 

What's New in 23.06

  • Improved USB authorization behavior

  • Added support for SafeNet AT SC650 v4.2k smartcard

  • Added enable reboot on session disconnect feature in AWI

  • Added support for automatic DNS and domain configuration using router advertisement messages in accordance with RFC

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 23.06 has been tested with Remote Workstation Card 23.06 with Remote Workstation Card Software 23.06.

Zero Client 23.06 has been tested with Remote Workstation Card Agent 23.06.

Leostream Connection Broker

Zero Client 23.06 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware

  • Horizon: Zero Client 23.06 has been tested with VMware Horizon 8.8-2212, and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.
  • Unified Access Gateway (UAG): UAG 2209 is not compatible with Zero Client firmware. It is recommended you upgrade to UAG 2212.

Imprivata OneSign

Zero Client 23.06 has been tested against Imprivata OneSign 7.8.3 with VMWare Horizon 8.7-2009.

23.06

End of Availability
This release is no longer supported.

Release Overview

This release maintains version parity with Remote Workstation Card firmware and includes new features, bug fixes and security updates over release 23.04. 

What's New in 23.06

  • Improved USB authorization behavior

  • Added support for SafeNet AT SC650 v4.2k smartcard

  • Added enable reboot on session disconnect feature in AWI

  • Added support for automatic DNS and domain configuration using router advertisement messages in accordance with RFC

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 23.06 has been tested with Remote Workstation Card 23.06 with Remote Workstation Card Software 23.06.

Zero Client 23.06 has been tested with Remote Workstation Card Agent 23.06.

Leostream Connection Broker

Zero Client 23.06 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware

  • Horizon: Zero Client 23.06 has been tested with VMware Horizon 8.8-2212, and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.
  • Unified Access Gateway (UAG): UAG 2209 is not compatible with Zero Client firmware. It is recommended you upgrade to UAG 2212.

Imprivata OneSign

Zero Client 23.06 has been tested against Imprivata OneSign 7.8.3 with VMWare Horizon 8.7-2009.

23.04

Technical Guidance

Release Overview

This release maintains version parity with Remote Workstation Card firmware and includes new features, bug fixes and security updates over release 23.01. 

What's New in 23.04

  • Added TLS 1.3 support for PCoIP Connection Manager, Connection Brokers, Direct to Host, and Syslog connections

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 23.04 has been tested with Remote Workstation Card 23.04 with Remote Workstation Card Software 23.04.

Zero Client 23.04 has been tested with Remote Workstation Card Agent 23.04.

Leostream Connection Broker

Zero Client 23.04 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware

  • Horizon: Zero Client 23.04 has been tested with VMware Horizon 8.8-2212, and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.
  • Unified Access Gateway (UAG): UAG 2209 is not compatible with Zero Client firmware. It is recommended you upgrade to UAG 2212.

Imprivata OneSign

Zero Client 23.04 has been tested against Imprivata OneSign 7.8.3 with VMWare Horizon 8.7-2009.

23.01

End of Support
This release is no longer supported.

Release Overview

This release maintains version parity with Remote Workstation Card firmware and includes new features, bug fixes, and security updates over release 22.09. 

What's New in 23.01

Factory resets can now be done via a configurable 4-key combination sequence

Attached display override setting can be individually set for each video port

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 23.01 has been tested with Remote Workstation Card 23.01 with Remote Workstation Card Software 23.01.

Zero Client 23.01 has been tested with Remote Workstation Card Agent 23.01.

Leostream Connection Broker

Zero Client 23.01 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware

  • Horizon: Zero Client 23.01 has been tested with VMware Horizon 8.6-2206 and 8.7-2209, and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.
  • Unified Access Gateway (UAG): UAG 2209 is not compatible with Zero Client firmware. It is recommended you upgrade to UAG 2212.

Imprivata OneSign

Zero Client 23.01 has been tested against Imprivata OneSign 7.8.3 with VMWare Horizon 8.7-2009.

22.09.1

End of Support
This release is no longer supported.

Release Overview

This release maintains version parity with Remote Workstation Card firmware and includes the accumulative new features, bug fixes, and security updates for 22.09 over release 22.07.

This release contains bug fixes and security updates over release 22.09.0. 

What's New in 22.09

  • Smart card PIN change now supported in pre-session for supported smart cards

  • Added support for Gemalto CT700 Smart Card Reader

  • Added supported Smart cards

    • PIVkey C990 / C910
    • G&D FIPS 201 SCE 7.0 PIV
    • G&D SmartCafe v7.0 DoD CAC NEATS
    • IDPrime/Thales MD 830 RevB FIPS 140-2 Level 3
    • IDPrime/Thales MD 930 FIPS 140-2 Level2

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 22.09 has been tested with Remote Workstation Card 22.09 with Remote Workstation Card Software 22.09.

Zero Client 22.09 has been tested with Remote Workstation Card Agent 22.09.

Leostream Connection Broker

Zero Client 22.09 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware

  • Horizon: Zero Client 22.09 has been tested with VMware Horizon 8.4 (2111) and 8.6-2206, and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.
  • Unified Access Gateway (UAG): UAG 2209 is not compatible with Zero Client firmware. It is recommended you upgrade to UAG 2212.

Imprivata OneSign

Zero Client 22.09 has been tested against Imprivata OneSign 7.8.3 with VMWare Horizon 8.6-2111.

22.09

End of Availability
This release is no longer supported.

Release Overview

This release maintains version parity with Remote Workstation Card firmware and includes new features, bug fixes, and security updates over release 22.07. 

What's New in 22.09

  • Smart card PIN change now supported in pre-session for supported smart cards

  • Added support for Gemalto CT700 Smart Card Reader

  • Added supported Smart cards

    • PIVkey C990 / C910
    • G&D FIPS 201 SCE 7.0 PIV
    • G&D SmartCafe v7.0 DoD CAC NEATS
    • IDPrime/Thales MD 830 RevB FIPS 140-2 Level 3
    • IDPrime/Thales MD 930 FIPS 140-2 Level2

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 22.09 has been tested with Remote Workstation Card 22.09 with Remote Workstation Card Software 22.09.

Zero Client 22.09 has been tested with Remote Workstation Card Agent 22.09.

Leostream Connection Broker

Zero Client 22.09 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware 

 

  • Horizon: Zero Client 22.09 has been tested with VMware Horizon 8.4 (2111) and 8.6-2206, and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.
  • Unified Access Gateway (UAG): UAG 2209 is not compatible with Zero Client firmware. It is recommended you upgrade to UAG 2212.

Imprivata OneSign

Zero Client 22.09 has been tested against Imprivata OneSign 7.8.3 with VMWare Horizon 8.6-2111.

22.07.3

End of Support
This release is no longer supported.

Release Overview

This release maintains version parity with Remote Workstation Card firmware and includes the accumulative new features, bug fixes, and security updates for 22.07 over release 22.04.

This release contains security updates over release 22.07.2. 

What's New in 22.07

  • Syslog Enhancements
    • Added Syslog connection types for TCP, and TCP with TLS
  • Added Syslog TCP/TLS usage type for certificate requests using SCEP
  • Optimized AWI browser experience

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 22.07 has been tested with Remote Workstation Card 22.07 with Remote Workstation Card Software 22.07.

Zero Client 22.07 has been tested with Remote Workstation Card Agent 22.07.

Leostream Connection Broker

Zero Client 22.07 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.07 has been tested with VMware Horizon 8.4 (2111), and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.07 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.4 (2111).

22.07.2

End of Availability
This release is no longer supported.

Release Overview

This release maintains version parity with Remote Workstation Card firmware and includes the accumulative new features, bug fixes, and security updates for 22.07 over release 22.04.

This release contains no new functional changes, known issues, fixed issues nor security updates over release 22.07.1. 

What's New in 22.07

  • Syslog Enhancements
    • Added Syslog connection types for TCP, and TCP with TLS
  • Added Syslog TCP/TLS usage type for certificate requests using SCEP
  • Optimized AWI browser experience

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 22.07 has been tested with Remote Workstation Card 22.07 with Remote Workstation Card Software 22.07.

Zero Client 22.07 has been tested with Remote Workstation Card Agent 22.07.

Leostream Connection Broker

Zero Client 22.07 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.07 has been tested with VMware Horizon 8.4 (2111), and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.07 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.4 (2111).

22.07.1

End of Availability
This release is no longer supported.

Release Overview

This is a release with bug fixes over release 22.07.0. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

What's New in 22.07

  • Syslog Enhancements
    • Added Syslog connection types for TCP, and TCP with TLS
  • Added Syslog TCP/TLS usage type for certificate requests using SCEP
  • Optimized AWI browser experience

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 22.07 has been tested with Remote Workstation Card 22.07 with Remote Workstation Card Software 22.07.

Zero Client 22.07 has been tested with Remote Workstation Card Agent 22.07.

Leostream Connection Broker

Zero Client 22.07 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.07 has been tested with VMware Horizon 8.4 (2111), and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.07 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.4 (2111).

22.07

End of Availability
This release is no longer supported.

Release Overview

This is a feature release with functional changes and bug fixes over release 22.04. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

What's New in 22.07

  • Syslog Enhancements
    • Added Syslog connection types for TCP, and TCP with TLS
  • Added Syslog TCP/TLS usage type for certificate requests using SCEP
  • Optimized AWI browser experience

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 22.07 has been tested with Remote Workstation Card 22.07 with Remote Workstation Card Software 22.07.

Zero Client 22.07 has been tested with Remote Workstation Card Agent 22.07.

Leostream Connection Broker

Zero Client 22.07 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.07 has been tested with VMware Horizon 8.4 (2111), and pre-certification is in progress. See pre-certified firmware releases here. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.07 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.4 (2111).

22.04.1

End of Support
This release is no longer supported.

Release Overview

This release contains security updates over release 22.04.0 and maintains version parity with other products.

What's New in 22.04

  • There are no new features in this release.

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 22.04 has been tested with Remote Workstation Card 22.04 using Remote Workstation Card Software 22.04.

Zero Client 22.04 has been tested with Remote Workstation Card Agent 22.04.

Leostream Connection Broker

Zero Client 22.04 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.04 has been certified with VMware Horizon 8.4 (2111). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.04 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.4 (2111).

22.04

End of Availability
This release is no longer supported.

Release Overview

This release contains bug fixes and security updates over release 22.01 and maintains version parity with other products.

What's New in 22.04

  • There are no new features in this release.

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 22.04 has been tested with Remote Workstation Card 22.04 using Remote Workstation Card Software 22.04.

Zero Client 22.04 has been tested with Remote Workstation Card Agent 22.04.

Leostream Connection Broker

Zero Client 22.04 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.04 has been certified with VMware Horizon 8.4 (2111). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.04 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.4 (2111).

22.01.4

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 22.01.5 is a firmware release for PCoIP Zero Clients.

This is a maintenance release with security improvements over release 22.01.4. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

What's New in 22.01

Improvements for Certificates using SCEP

  • Added Maximum Compatibility and Suite B Peer-to-peer certificates usage types
  • Added an option for automatic renewal of SCEP issued certificates
  • Added new information in certificate details page

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

SCEP renewal and P2P certificate usage will be supported in a future Management Console release.

Remote Workstation Card

Zero Client 22.01 has been tested with Remote Workstation Card 22.01.

Zero Client 22.01 has been tested with Remote Workstation Card Agent 22.01.

Leostream Connection Broker

Zero Client 22.01 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.01 has been certified with VMware Horizon 8.4 (2111). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.01 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.2 (2103).

22.01.4

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 22.01.4 is a firmware release for PCoIP Zero Clients.

This is a maintenance release with security improvements over release 22.01.3. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

What's New in 22.01

Improvements for Certificates using SCEP

  • Added Maximum Compatibility and Suite B Peer-to-peer certificates usage types
  • Added an option for automatic renewal of SCEP issued certificates
  • Added new information in certificate details page

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

SCEP renewal and P2P certificate usage will be supported in a future Management Console release.

Remote Workstation Card

Zero Client 22.01 has been tested with Remote Workstation Card 22.01.

Zero Client 22.01 has been tested with Remote Workstation Card Agent 22.01.

Leostream Connection Broker

Zero Client 22.01 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.01 has been certified with VMware Horizon 8.4 (2111). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.01 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.2 (2103).

22.01.3

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 22.01.3 is a firmware release for PCoIP Zero Clients.

This is a maintenance release with security improvements over release 22.01.2. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

What's New in 22.01

Improvements for Certificates using SCEP

  • Added Maximum Compatibility and Suite B Peer-to-peer certificates usage types
  • Added an option for automatic renewal of SCEP issued certificates
  • Added new information in certificate details page

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

SCEP renewal and P2P certificate usage will be supported in a future Management Console release.

Remote Workstation Card

Zero Client 22.01 has been tested with Remote Workstation Card 22.01.

Zero Client 22.01 has been tested with Remote Workstation Card Agent 22.01.

Leostream Connection Broker

Zero Client 22.01 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.01 has been certified with VMware Horizon 8.4 (2111). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.01 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.2 (2103).

22.01.2

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 22.01.2 is a firmware release for PCoIP Zero Clients.

This is a maintenance release with bug fixes and security improvements over release 22.01.0. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

What's New in 22.01

Improvements for Certificates using SCEP

  • Added Maximum Compatibility and Suite B Peer-to-peer certificates usage types
  • Added an option for automatic renewal of SCEP issued certificates
  • Added new information in certificate details page

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

SCEP renewal and P2P certificate usage will be supported in a future Management Console release.

Remote Workstation Card

Zero Client 22.01 has been tested with Remote Workstation Card 22.01.

Zero Client 22.01 has been tested with Remote Workstation Card Agent 22.01.

Leostream Connection Broker

Zero Client 22.01 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.01 has been certified with VMware Horizon 8.4 (2111). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.01 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.2 (2103).

22.01

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 22.01.0 is a firmware release for PCoIP Zero Clients.

This is a feature release with functional changes and bug fixes over release 21.10. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

What's New in 22.01

Improvements for Certificates using SCEP

  • Added Maximum Compatibility and Suite B Peer-to-peer certificates usage types
  • Added an option for automatic renewal of SCEP issued certificates
  • Added new information in certificate details page

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

SCEP renewal and P2P certificate usage will be supported in a future Management Console release.

Remote Workstation Card

Zero Client 22.01 has been tested with Remote Workstation Card 22.01.

Zero Client 22.01 has been tested with Remote Workstation Card Agent 22.01.

Leostream Connection Broker

Zero Client 22.01 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 22.01 has been tested with has been tested with VMware Horizon 8.3 (2106). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 22.01 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.2 (2103).

21.10.3

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.10.3 is a firmware release for PCoIP Zero Clients.

This is a maintenance release with security fixes over release 21.10.2. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

What's New in 21.10

Added Smart Card Support

Added support for the following Thales smart cards:

  •     IDPrime 930 FIPS 140 L2
  •     IDPrime 930 FIPS 140 L3
  •     IDPrime 3930 FIPS 140 L2
  •     IDPrime 940
  •     IDPrime 3940
  •     eToken 5110

Increased Number of AWS Registration Codes from 10 to 50

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.10 has been tested with Remote Workstation Card 21.10.

Zero Client 21.10 only works with Remote Workstation Card 21.01 or later.

Zero Client 21.10 has been tested with Remote Workstation Card Agent 21.07.

Leostream Connection Broker

Zero Client 21.10 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.10 has been tested with has been tested with VMware Horizon 8.1 (2012) and Horizon 8.2 (2013). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 21.10 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.2 (2013).

21.10.2

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.10.2 is a firmware release for PCoIP Zero Clients.

This is a maintenance release with security fixes over release 21.10.1. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

What's New in 21.10

Added Smart Card Support

Added support for the following Thales smart cards:

  •     IDPrime 930 FIPS 140 L2
  •     IDPrime 930 FIPS 140 L3
  •     IDPrime 3930 FIPS 140 L2
  •     IDPrime 940
  •     IDPrime 3940
  •     eToken 5110

Increased Number of AWS Registration Codes from 10 to 50

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.10 has been tested with Remote Workstation Card 21.10.

Zero Client 21.10 only works with Remote Workstation Card 21.01 or later.

Zero Client 21.10 has been tested with Remote Workstation Card Agent 21.07.

Leostream Connection Broker

Zero Client 21.10 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.10 has been tested with has been tested with VMware Horizon 8.1 (2012) and Horizon 8.2 (2013). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 21.10 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.2 (2013).

21.10.1

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.10.1 is a firmware release for PCoIP Zero Clients.

This is a maintenance release with security fixes over release 21.10.0. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.10

Added Smart Card Support

Added support for the following Thales smart cards:

  •     IDPrime 930 FIPS 140 L2
  •     IDPrime 930 FIPS 140 L3
  •     IDPrime 3930 FIPS 140 L2
  •     IDPrime 940
  •     IDPrime 3940
  •     eToken 5110

Increased Number of AWS Registration Codes from 10 to 50

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.10 has been tested with Remote Workstation Card 21.10.

Zero Client 21.10 only works with Remote Workstation Card 21.01 or later.

Zero Client 21.10 has been tested with Remote Workstation Card Agent 21.07.

Leostream Connection Broker

Zero Client 21.10 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.10 has been tested with has been tested with VMware Horizon 8.1 (2012) and Horizon 8.2 (2013). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 21.10 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.2 (2013).

21.10

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.10.0 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This is a feature release with functional changes and bug fixes over release 21.07. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.10

Added Smart Card Support

Added support for the following Thales smart cards:

  •     IDPrime 930 FIPS 140 L2
  •     IDPrime 930 FIPS 140 L3
  •     IDPrime 3930 FIPS 140 L2
  •     IDPrime 940
  •     IDPrime 3940
  •     eToken 5110

Increased Number of AWS Registration Codes from 10 to 50

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.10 has been tested with Remote Workstation Card 21.10.

Zero Client 21.10 only works with Remote Workstation Card 21.01 or later.

Zero Client 21.10 has been tested with Remote Workstation Card Agent 21.07.

Leostream Connection Broker

Zero Client 21.10 is compatible with Leostream Connection Broker version 8.2 with minimum TLS 1.2. It is not compatible with earlier versions of the Leostream Connection Broker. 
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.10 has been tested with has been tested with VMware Horizon 8.1 (2012) and Horizon 8.2 (2013). It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 21.10 has been tested against Imprivata OneSign 7.4.0 with VMWare Horizon 8.2 (2013).

21.07.3

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.07.3 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release adds fixes an issue where USB devices connected to Zero Clients running firmware 21.07.0 through to 21.07.2 did not work. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.07

SCEP Improvements

Obtaining Certificates Automatically which now include requests for AWI certificates.

Added Smart Card Support

Added support for Thales/Gemalto IDPrime 940 smart card.

Security Updates

Removed support for TLS 1.1.

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.07 has been tested with Remote Workstation Card 21.07.

Zero Client 21.07 only works with Remote Workstation Card 21.01 or later.

Leostream Connection Broker

Zero Client 21.07 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.2 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.07 has been tested with VMWare Horizon 8.2 2103. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 21.07 has been tested against Imprivata OneSign 6.3.0 with VMware Horizon 8.1 2012.

21.07

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.07.0 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a feature release with functional changes and bug fixes over release 21.03. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.07

SCEP Improvements

Improved security for Obtaining Certificates Automatically which now include requests for AWI certificates.

Added Smart Card Support

Added support for Thales/Gemalto IDPrime 940 smart card.

Security Updates

Removed support for TLS 1.1.

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.07 has been tested with Remote Workstation Card 21.07.

Zero Client 21.07 only works with Remote Workstation Card 21.01 or later.

Leostream Connection Broker

Zero Client 21.07 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.07 has been tested with VMWare Horizon 8.2 2103. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 21.07 has been tested against Imprivata OneSign 6.3.0 with VMware Horizon 8.1 2012.

21.03.5

End of Support
This release is no longer supported.

Release Overview

This release is a maintenance release with security updates over release 21.03.4.

These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.03

Additional Smart Card Support

Smart Card IDEMIA Cosmo 8.1 r2 with IAS-ECC V1.0.1 applet on Horizon View support added.

Added New Logging Capabilities

  • Latency to Management Console is captured in the logs every 10 minutes
  • NTP time syncs are fully logged
  • Session log id is displayed in the syslog

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.03 has been tested with Remote Workstation Card 21.03.

Important: Zero Client 21.03 only works with Remote Workstation Card 21.01 or later.

Leostream Connection Broker

Zero Client 21.03 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.03 has been tested with VMWare Horizon 8.1 2012. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 21.03 has been tested against Imprivata OneSign 6.3.0 with VMware Horizon 8 2006

21.03.4

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.03.4 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with bug fixes and security updates over release 21.03.3. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.03

Additional Smart Card Support

Smart Card IDEMIA Cosmo 8.1 r2 with IAS-ECC V1.0.1 applet on Horizon View support added.

Added New Logging Capabilities

  • Latency to Management Console is captured in the logs every 10 minutes
  • NTP time syncs are fully logged
  • Session log id is displayed in the syslog

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.03 has been tested with Remote Workstation Card 21.03.

Important: Zero Client 21.03 only works with Remote Workstation Card 21.01 or later.

Leostream Connection Broker

Zero Client 21.03 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.03 has been tested with VMWare Horizon 8.1 2012. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 21.03 has been tested against Imprivata OneSign 6.3.0 with VMware Horizon 8 2006

21.03.3

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.03.3 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with bug fixes and security updates over release 21.01. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.03

Additional Smart Card Support

Smart Card IDEMIA Cosmo 8.1 r2 with IAS-ECC V1.0.1 applet on Horizon View support added.

Added New Logging Capabilities

  • Latency to Management Console is captured in the logs every 10 minutes
  • NTP time syncs are fully logged
  • Blocked keyboard entries are logged by default
  • Session log id is displayed in the syslog

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.03 has been tested with Remote Workstation Card 21.03.

Important: Zero Client 21.03 only works with Remote Workstation Card 21.01 or later.

Leostream Connection Broker

Zero Client 21.03 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.03 has been tested with VMWare Horizon 8.1 2012. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 21.03 has been tested against Imprivata OneSign 6.3.0 with VMware Horizon 8 2006

21.03.2

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.03.2 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with bug fixes and security updates over release 21.01. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.03

Additional Smart Card Support

Smart Card IDEMIA Cosmo 8.1 r2 with IAS-ECC V1.0.1 applet on Horizon View support added.

Added New Logging Capabilities

  • Latency to Management Console is captured in the logs every 10 minutes
  • NTP time syncs are fully logged
  • Blocked keyboard entries are logged by default
  • Session log id is displayed in the syslog

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.03 has been tested with Remote Workstation Card 21.03.

Important: Zero Client 21.03 only works with Remote Workstation Card 21.01 or later.

Leostream Connection Broker

Zero Client 21.03 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.03 has been tested with VMWare Horizon 8.1 2012. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

Imprivata OneSign

Zero Client 21.03 has been tested against Imprivata OneSign 6.3.0 with VMware Horizon 8 2006

21.03

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.03.0 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a feature release with functional changes and bug fixes over release 21.01. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.03

Additional Smart Card Support

Smart Card IDEMIA Cosmo 8.1 r2 with IAS-ECC V1.0.1 applet on Horizon View support added.

Added New Logging Capabilities

  • Latency to Management Console is captured in the logs every 10 minutes
  • NTP time syncs are fully logged
  • Blocked keyboard entries are logged by default
  • Session log id is displayed in the syslog

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.03 has been tested with Remote Workstation Card 21.03.

Zero Client 21.03 only works with Remote Workstation Card 21.01 or later.

Leostream Connection Broker

Zero Client 21.03 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.03 has been tested with VMWare Horizon 8.1 2012. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 21.03 has been tested against Imprivata OneSign 6.3.0 with VMware Horizon 8 2006

21.01.3

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.01.3 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with bug fixes and security fixes over release 21.01.2. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.01

Security Update

Removed support for any ciphers that use RSA for key exchange. Only ciphers that use ECDHE/DHE for key exchange are now supported.

Important: Zero Client 21.01 can only connect to Remote Workstation Card 21.01 or later (due to the cipher suite updates mentioned above)

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.01 has been tested with Remote Workstation Card 21.01.

Zero Client 21.01 only works with Remote Workstation Card 21.01 or later.

Leostream Connection Broker

Zero Client 21.01 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.01 has been tested with VMWare Horizon 7.13 and 8 2006. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 21.01 has been tested against Imprivata OneSign 6.3.0 with VMware Horizon 8 2006

21.01.2

End of Availability
This release is no longer supported.

Release 21.01.2 of the Zero Client Firmware is a maintenance release which replaces and deprecates 21.01. This release maintains compatibility with Remote Workstation Card and has no further updates.

21.01

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 21.01.0 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a feature release with functional changes and bug fixes over release 20.10. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

What's New in 21.01

Security Update

Removed support for any ciphers that use RSA for key exchange. Only ciphers that use ECDHE/DHE for key exchange are now supported.

Zero Client 21.01 can only connect to Remote Workstation Card 21.01 or later (due to the cipher suite updates mentioned above)

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 21.01 has been tested with Remote Workstation Card 21.01.

Zero Client 21.01 only works with Remote Workstation Card 21.01 or later.

Leostream Connection Broker

Zero Client 21.01 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 21.01 has been tested with VMWare Horizon 7.13 and 8 2006. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 21.01 has been tested against Imprivata OneSign 6.3.0 with VMware Horizon 8 2006

20.10.1

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.10.1 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards). These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

This release is a maintenance release with security updates and bug fixes over release 20.10.0.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in 20.10

Keyboard Scan Code Filter

Keyboard scan code filters used to prevent keyboard keys and key combinations from working can now be applied via Management Console. See Configuring Keyboard Settings.

Removal of SNMPv2

Removed SNMPv2 support and SNMP Community Name option, leaving the more secure SNMPv3 options available for SNMP configuration.

Security Update

Security updates and bug fixes.

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 20.10 has been tested with Remote Workstation Card 20.10.

Leostream Connection Broker

Zero Client 20.10 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.10 has been tested with VMWare Horizon 7.13 and 8.0. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.10.0 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.12

20.10

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.10.0 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a feature release with functional changes and bug fixes over release 20.07. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in 2010

This release contains new features, bug fixes and security updates.

Keyboard Scan Code Filter

Keyboard scan code filters used to prevent keyboard keys and key combinations from working can now be applied via Management Console. See Configuring Keyboard Settings.

Removal of SNMPv2

Removed SNMPv2 support and SNMP Community Name option, leaving the more secure SNMPv3 options available for SNMP configuration.

Python library updated from 2.7 to 3.6

Management Console now uses Python 3.7 libraries. Customers upgrading to Release 2010.10 via RPM require access to the Internet to install Python 3.7 libraries. Optionally, customers can upgrade via the OVA format (which is packaged with Python 3.7 libraries) for this release and use the RPM to upgrade in future releases when access to the Internet is not a requirement for RPM.

Security updates and bug fixes

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 20.10 has been tested with Remote Workstation Card 20.10.

Leostream Connection Broker

Zero Client 20.10 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.10 has been tested with VMWare Horizon 7.12 and 8.0. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.10.0 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.12

20.07.3

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.07.3 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards). These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

This release is a maintenance release with security updates.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in 20.07

SNMPv3

Introduces SNMPv3 support via AWI

  • Support for SNMPv3 will be available in Management Console 20.10
  • SNMPv2 will be removed in Management Console 20.10 and Zero Client 20.10

Qualys scan resilience

Qualys scanner no longer breaks communication between PCoIP Zero Client and Management Console

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer

Remote Workstation Card

Zero Client 20.07 has been tested with Remote Workstation Card 20.07 and 20.04.

Leostream Connection Broker

Zero Client 20.07 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.07 has been tested with VMWare Horizon 7.12. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.07zero has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.07.2

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.07.2 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards). These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

This release is a maintenance release with security updates and fixed issues with Logitech H390.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in 20.07

SNMPv3

Introduces SNMPv3 support via AWI

  • Support for SNMPv3 will be available in Management Console 20.10
  • SNMPv2 will be removed in Management Console 20.10 and Zero Client 20.10

Qualys scan resilience

Qualys scanner no longer breaks communication between PCoIP Zero Client and Management Console

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer

Remote Workstation Card

Zero Client 20.07 has been tested with Remote Workstation Card 20.07 and 20.04.

Leostream Connection Broker

Zero Client 20.07 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.07 has been tested with VMWare Horizon 7.12. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.07zero has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.07.1

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.07.1 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with security updates and bug fixes. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in Release 20.07

This release contains new features, bug fixes and security updates.

SNMPv3

Introduces SNMPv3 support via AWI

  • Support for SNMPv3 will be available in Management Console 20.10
  • SNMPv2 will be removed in Management Console 20.10 and Zero Client 20.10

Qualys scan resilience

Qualys scanner no longer breaks communication between PCoIP Zero Client and Management Console

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer

Remote Workstation Card

Zero Client 20.07 has been tested with Remote Workstation Card 20.07 and 20.04.

Leostream Connection Broker

Zero Client 20.07 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.07 has been tested with VMWare Horizon 7.12. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.07zero has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.07

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.07.0 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a feature release with functional changes and bug fixes over release 20.04. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in Release 20.07

This release contains new features, bug fixes and security updates.

SNMPv3

Introduces SNMPv3 support via AWI

  • Support for SNMPv3 will be available in Management Console 20.10
  • SNMPv2 will be removed in Management Console 20.10 and Zero Client 20.10

Qualys scan resilience

Qualys scanner no longer breaks communication between PCoIP Zero Client and Management Console

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer

Remote Workstation Card

Zero Client 20.07 has been tested with Remote Workstation Card 20.07 and 20.04.

Leostream Connection Broker

Zero Client 20.07 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.07 has been tested with VMWare Horizon 7.12. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.07zero has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.04.4

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.04.4 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards). These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

This release is a maintenance release containing security fixes.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in 20.04

Wacom Tablet Additions

Wacom Cintiq Pro 32 can be locally terminated when connecting to Cloud Access Software standard or graphics agent.

Keyboard Fixes

Fixed issue where the 'calculator' button was not working on some keyboards.

Fixed issue where 'function' key could not be toggled on some keyboards.

USB Headset Fixes

Fixes issue with Logitech H540 headset

Security Update

Security updates

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer

Remote Workstation Card

Zero Client 20.04 has been tested with Remote Workstation Card 20.04 and 20.01.

Leostream Connection Broker

Zero Client 20.04 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.04 has been tested with VMWare Horizon 7.11. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.04 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.04.3

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.04.3 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release containing security fixes. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in Release 20.04

This release contains bug fixes and security updates.

Wacom Tablet Additions

Wacom Cintiq Pro 32 can be locally terminated when connecting to Cloud Access Software standard or graphics agent.

Security Update

Security updates

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer

Remote Workstation Card

Zero Client 20.04 has been tested with Remote Workstation Card 20.04 and 20.01.

Leostream Connection Broker

Zero Client 20.04 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.04 has been tested with VMWare Horizon 7.11. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.04 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.04.2

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.04.2 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release containing security updates. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in Release 20.04

This release contains bug fixes and security updates.

Wacom Tablet Additions

Wacom Cintiq Pro 32 can be locally terminated when connecting to Cloud Access Software standard or graphics agent.

Keyboard Fixes

Fixed issue where the 'calculator' button was not working on some keyboards.

Fixed issue where 'function' key could not be toggled on some keyboards.

USB Headset Fixes

Fixes issue with Logitech H540 headset

Security Update

Security updates

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer

Remote Workstation Card

Zero Client 20.04 has been tested with Remote Workstation Card 20.04 and 20.01.

Leostream Connection Broker

Zero Client 20.04 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.04 has been tested with VMWare Horizon 7.12. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.04 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.04.1

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.04.1 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a feature release with functional changes and bug fixes over release 20.01. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in Release 20.04

This release contains bug fixes and security updates.

Wacom Tablet Additions

Wacom Cintiq Pro 32 can be locally terminated when connecting to Cloud Access Software standard or graphics agent.

Keyboard Fixes

Fixed issue where the 'calculator' button was not working on some keyboards.

Fixed issue where 'function' key could not be toggled on some keyboards.

USB Headset Fixes

Fixes issue with Logitech H540 headset

Security Update

Security updates

Compatibility 

Management Console

This firmware is supported with Management Console 20.01 or newer

Remote Workstation Card

Zero Client 20.04 has been tested with Remote Workstation Card 20.04 and 20.01.

Leostream Connection Broker

Zero Client 20.04 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.04 has been tested with VMWare Horizon 7.12. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.04 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.01.4

End of Support
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.01.4 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with security updates. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in Release 20.01

Use with Management Console version 20.01

This firmware should only be used with Management Console 20.01 or newer

4K Display support

Support for 4K resolutions on supported 4k monitors. See  What Can You Connect To Using Your Tera2 PCoIP Zero Client?

Reset Notification Timeout

A pop up message can be enabled that notifies the user the PCoIP Zero Client is about to restart. See Setting Up Your Tera2 PCoIP Zero Client

Versioning Number Change

PCoIP Zero Client firmware is on a new numbering scheme, where the first number is the release date year, and the second number is the release date month, and the third number is the number of maintenance releases.

Security Update

The TLS_RSA_WITH_RC4_128_SHA cipher suite for encrypting Pre-Session communications with VMware Horizon Environments has been removed

Compatibility 

Remote Workstation Card

Zero Client 20.01 has been tested with Remote Workstation Card 20.01 and 5.1.

Leostream Connection Broker

Zero Client 20.01 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.01 has been certified with VMWare Horizon 7.12. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.01 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.01.3

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.01.3 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with security updates and bug fixes. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

 

What's New in Release 20.01

Use with Management Console version 20.01

This firmware should only be used with Management Console 20.01 or newer

4K Display support

Support for 4K resolutions on supported 4k monitors. See  What Can You Connect To Using Your Tera2 PCoIP Zero Client?

Reset Notification Timeout

A pop up message can be enabled that notifies the user the PCoIP Zero Client is about to restart. See Setting Up Your Tera2 PCoIP Zero Client

Versioning Number Change

PCoIP Zero Client firmware is on a new numbering scheme, where the first number is the release date year, and the second number is the release date month, and the third number is the number of maintenance releases.

Security Update

The TLS_RSA_WITH_RC4_128_SHA cipher suite for encrypting Pre-Session communications with VMware Horizon Environments has been removed

Compatibility 

Remote Workstation Card

Zero Client 20.01 has been tested with Remote Workstation Card 20.01 and 5.1.

Leostream Connection Broker

Zero Client 20.01 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.01 has been certified with VMWare Horizon 7.11. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.01 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.01.1

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.01.1 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with security updates and bug fixes. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

 

What's New in Release 20.01

Use with Management Console version 20.01

This firmware should only be used with Management Console 20.01 or newer

4K Display support

Support for 4K resolutions on supported 4k monitors. See  What Can You Connect To Using Your Tera2 PCoIP Zero Client?

Reset Notification Timeout

A pop up message can be enabled that notifies the user the PCoIP Zero Client is about to restart. See Setting Up Your Tera2 PCoIP Zero Client

Versioning Number Change

PCoIP Zero Client firmware is on a new numbering scheme, where the first number is the release date year, and the second number is the release date month, and the third number is the number of maintenance releases.

Security Update

The TLS_RSA_WITH_RC4_128_SHA cipher suite for encrypting Pre-Session communications with VMware Horizon Environments has been removed

Compatibility 

Remote Workstation Card

Zero Client 20.01 has been tested with Remote Workstation Card 20.01 and 5.1.

Leostream Connection Broker

Zero Client 20.01 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 20.01 has been certified with VMWare Horizon 7.11. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.01 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

20.01

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 20.01.0 is a firmware release for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a feature release with functional changes and bug fixes over release 6.5.1. These release notes provide a summary of key feature additions, compatibility notes, resolved issues, and known issues for this release.

Note: only All Access subscribers are eligible to receive this release.

 

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

 

What's New in Release 20.01

Use with Management Console version 20.01

This firmware should only be used with Management Console 20.01 or newer

4K Display support

Support for 4K resolutions on supported 4k monitors. See  What Can You Connect To Using Your Tera2 PCoIP Zero Client?

Reset Notification Timeout

A pop up message can be enabled that notifies the user the PCoIP Zero Client is about to restart. See Setting Up Your Tera2 PCoIP Zero Client

Versioning Number Change

PCoIP Zero Client firmware is on a new numbering scheme, where the first number is the release date year, and the second number is the release date month, and the third number is the number of maintenance releases.

Security Update

The TLS_RSA_WITH_RC4_128_SHA cipher suite for encrypting Pre-Session communications with VMware Horizon Environments has been removed

Compatibility 

Remote Workstation Card

Zero Client 20.01.0 has been tested with Remote Workstation Card 20.01.0 and 5.1.0.

Leostream Connection Broker

Zero Client 20.01.0 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client firmware 20.01.0 has been tested with VMware Horizon 7.10 and 7.11 and certified with VMware Horizon 7.11.0. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 20.01.0 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10

17.05.4

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 17.05.4 is a firmware release replacing firmware 5.5.2 for PCoIP Zero Clients (not PCoIP Remote Workstation Cards). These release notes provide a summary of new features, compatibility notes, resolved issues, and known issues for this release.

This release is a maintenance release with security updates over release 17.05.3.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 17.05 or 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in 17.05

Versioning Number Change

PCoIP Zero Client firmware is on a new numbering scheme, where the first number is the release date year, and the second number is the release date month, and the third number is the number of maintenance releases.
PCoIP Zero Client firmware 17.05 replaces firmware 5.5.

Use with Management Console version 20.01 or newer

This firmware is supported with Management Console 20.01 or newer.

Security Updates

This release contains security updates over firmware 5.5.2.

  • The TLS_RSA_WITH_RC4_128_SHA cipher suite for encrypting Pre-Session communications with VMware Horizon Environments has been removed.
  • TLS 1.0 is no longer available to initiate PCoIP sessions. TLS 1.1 must be used as the minimum version to initiate PCoIP sessions.
  • AES-128 has been removed. PCoIP session can only be encrypted with AES-256.
  • The PCoIP Zero Client Administrative Web Interface now requires web browsers that support TLS 1.2.

Removal of CounterPath Unified Communications

Unified Communications is no longer supported on Tera 2.

Administrative Web Interface (AWI) is disabled by default

By default, the Administrative Web Interface is disabled. To enable it, please read instructions here.

SLP is disabled by default

By default, SLP discovery is disabled.

Compatibility

Use with Management Console version 20.01 or newer

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 17.05 has been tested with Remote Workstation Card 17.05.

Leostream Connection Broker

Zero Client 17.05 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 17.05 has been tested with VMWare Horizon 7.11. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 17.05 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10.

 

 

17.05.3

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 17.05.3 is a firmware release replacing firmware 5.5.2 for PCoIP Zero Clients (not PCoIP Remote Workstation Cards). These release notes provide a summary of new features, compatibility notes, resolved issues, and known issues for this release.

This release is a maintenance release with security updates over release 17.05.2.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 17.05 or 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in 17.05

Versioning Number Change

PCoIP Zero Client firmware is on a new numbering scheme, where the first number is the release date year, and the second number is the release date month, and the third number is the number of maintenance releases.
PCoIP Zero Client firmware 17.05 replaces firmware 5.5.

Use with Management Console version 20.01 or newer

This firmware is supported with Management Console 20.01 or newer.

Security Updates

This release contains security updates over firmware 5.5.2.

  • The TLS_RSA_WITH_RC4_128_SHA cipher suite for encrypting Pre-Session communications with VMware Horizon Environments has been removed.
  • TLS 1.0 is no longer available to initiate PCoIP sessions. TLS 1.1 must be used as the minimum version to initiate PCoIP sessions.
  • AES-128 has been removed. PCoIP session can only be encrypted with AES-256.
  • The PCoIP Zero Client Administrative Web Interface now requires web browsers that support TLS 1.2.

Removal of CounterPath Unified Communications

Unified Communications is no longer supported on Tera 2.

Administrative Web Interface (AWI) is disabled by default

By default, the Administrative Web Interface is disabled. To enable it, please read instructions here.

SLP is disabled by default

By default, SLP discovery is disabled.

Compatibility

Use with Management Console version 20.01 or newer

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 17.05 has been tested with Remote Workstation Card 17.05.

Leostream Connection Broker

Zero Client 17.05 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 17.05 has been tested with VMWare Horizon 7.11. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 17.05 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10.

 

 

17.05.2

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 17.05.2 is a firmware release replacing firmware 5.5.2 for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with security updates over release 17.05.1. These release notes provide a summary of compatibility notes, resolved issues, and known issues for this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 17.05 or 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in Release 17.05

Versioning Number Change

PCoIP Zero Client firmware is on a new numbering scheme, where the first number is the release date year, and the second number is the release date month, and the third number is the number of maintenance releases.
PCoIP Zero Client firmware 17.05 replaces firmware 5.5.

Use with Management Console version 20.01 or newer

This firmware is supported with Management Console 20.01 or newer.

Security Updates

This release contains security updates over firmware 5.5.2.

  • The TLS_RSA_WITH_RC4_128_SHA cipher suite for encrypting Pre-Session communications with VMware Horizon Environments has been removed.
  • TLS 1.0 is no longer available to initiate PCoIP sessions. TLS 1.1 must be used as the minimum version to initiate PCoIP sessions.
  • AES-128 has been removed. PCoIP session can only be encrypted with AES-256.
  • The PCoIP Zero Client Administrative Web Interface now requires web browsers that support TLS 1.2.

Removal of CounterPath Unified Communications

Unified Communications is no longer supported on Tera 2.

Administrative Web Interface (AWI) is disabled by default

By default, the Administrative Web Interface is disabled. To enable it, please read instructions here.

SLP is disabled by default

By default, SLP discovery is disabled.

Compatibility

Use with Management Console version 20.01 or newer

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 17.05 has been tested with Remote Workstation Card 17.05.

Leostream Connection Broker

Zero Client 17.05 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 17.05 has been tested with VMWare Horizon 7.11. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 17.05 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10.

 

 

17.05.1

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 17.05.1 is a firmware release replacing firmware 5.5.2 for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release containing security updates. These release notes provide a summary of compatibility notes, resolved issues, and known issues for this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 17.05 or 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in Release 17.05

Versioning Number Change

PCoIP Zero Client firmware is on a new numbering scheme, where the first number is the release date year, and the second number is the release date month, and the third number is the number of maintenance releases.
PCoIP Zero Client firmware 17.05 replaces firmware 5.5.

Use with Management Console version 20.01 or newer

This firmware is supported with Management Console 20.01 or newer.

Security Updates

This release contains security updates over firmware 5.5.2.

  • The TLS_RSA_WITH_RC4_128_SHA cipher suite for encrypting Pre-Session communications with VMware Horizon Environments has been removed.
  • TLS 1.0 is no longer available to initiate PCoIP sessions. TLS 1.1 must be used as the minimum version to initiate PCoIP sessions.
  • AES-128 has been removed. PCoIP session can only be encrypted with AES-256.
  • The PCoIP Zero Client Administrative Web Interface now requires web browsers that support TLS 1.2.

Removal of CounterPath Unified Communications

Unified Communications is no longer supported on Tera 2.

Administrative Web Interface (AWI) is disabled by default

By default, the Administrative Web Interface is disabled. To enable it, please read instructions here.

SLP is disabled by default

By default, SLP discovery is disabled.

Compatibility

Use with Management Console version 20.01 or newer

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 17.05 has been tested with Remote Workstation Card 17.05.

Leostream Connection Broker

Zero Client 17.05 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 17.05 has been tested with VMWare Horizon 7.11. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 17.05 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10.

 

 

17.05

End of Availability
This release is no longer supported.

Release Overview

PCoIP Zero Client Firmware 17.05.0 is a firmware release replacing firmware 5.5.2 for PCoIP Zero Clients (not PCoIP Remote Workstation Cards).

This release is a maintenance release with bug fixes and security updates over release 5.5.2. These release notes provide a summary of compatibility notes, resolved issues, and known issues for this release.

Important Notice

If you are using PCoIP Management Console to deploy firmware updates, you must upgrade to Management Console 20.01 or newer before deploying firmware 17.05 or 20.01 or newer.

Deploying endpoints from an earlier version of Management Console may cause endpoints to become unmanageable.

For further details see knowledge base article KB 3230

What's New in Release 17.05

Versioning Number Change

PCoIP Zero Client firmware is on a new numbering scheme, where the first number is the release date year, and the second number is the release date month, and the third number is the number of maintenance releases.
PCoIP Zero Client firmware 17.05 replaces firmware 5.5.

Use with Management Console version 20.01 or newer

This firmware is supported with Management Console 20.01 or newer.

Security Updates

This release contains security updates over firmware 5.5.2.

  • The TLS_RSA_WITH_RC4_128_SHA cipher suite for encrypting Pre-Session communications with VMware Horizon Environments has been removed.
  • TLS 1.0 is no longer available to initiate PCoIP sessions. TLS 1.1 must be used as the minimum version to initiate PCoIP sessions.
  • AES-128 has been removed. PCoIP session can only be encrypted with AES-256.
  • The PCoIP Zero Client Administrative Web Interface now requires web browsers that support TLS 1.2.

Removal of CounterPath Unified Communications

Unified Communications is no longer supported on Tera 2.

Administrative Web Interface (AWI) is disabled by default

By default, the Administrative Web Interface is disabled. To enable it, please read instructions here.

SLP is disabled by default

By default, SLP discovery is disabled.

Compatibility

Use with Management Console version 20.01 or newer

This firmware is supported with Management Console 20.01 or newer.

Remote Workstation Card

Zero Client 17.05 has been tested with Remote Workstation Card 17.05.

Leostream Connection Broker

Zero Client 17.05 is compatible with Leostream Connection Broker version 8.2. It is not compatible with earlier versions of the Leostream Connection Broker.

Note: After upgrading from PCoIP Zero Client Firmware 4.x to 5.0 or higher, the session connection type for the Zero Client must be changed to PCoIP Connection Manager, with the address of the Leostream Connection Broker. Also ensure the Leostream Connection Broker has had Enable TLSv1.1 protocol enabled in the Leostream Connection Broker Security Options section of the Connection Broker > System > Settings page.
Brokering of the Remote Workstation Card requires the installation of the Teradici Remote Workstation Card Agent.

VMware Horizon

Zero Client 17.05 has been tested with VMWare Horizon 7.11. It is also compatible with one major release of Horizon prior to this. Other versions of Horizon may also be compatible, but will need to be verified in your specific deployment environment.

PCoIP Connection Manager for Amazon WorkSpaces

PCoIP Connection Manager for Amazon WorkSpaces 1.0.7 or higher is required in order to connect to Amazon WorkSpaces using the PCoIP Connection Manager session type.

Imprivata OneSign

Zero Client 17.05 has been tested against Imprivata OneSign 6.0.1 with VMware Horizon 7.10.