Could the use of two DVI channels be a sources for delay which might cause jitter in a PCoIP Remote Workstation Card configuration?
Using the two DVI channels on a PCoIP Zero Client to PCoIP Remote Workstation Card with the Dual-link DVI connector converter to achieve a 2560x1600 resolution is NOT a source for delay which might cause jitter. The use of two DVI channels could be one of …
Can I constrain PCoIP bandwidth usage to fit my network?
The maximum PCoIP bandwidth usage an be configured per a session. When restricting the maximum PCoIP session bandwidth, the frame rate and image quality maybe reduced due to the reduction in bandwidth. For limiting PCoIP Zero Clients see: PCoIP Zero …
What is Intelligent Packet Re-Transmission in PCoIP Protocol?
PCoIP Protocol uses UDP protocol similar to other real-time protocols (voice-over-IP, interactive video conferencing etc).  This is done to minimize the overhead associated with TCP protocol.  However, reliable transmission of data is important for remote …
Does the PCoIP Host Software work in systems with more than one PCoIP Remote Workstation Card?
No, the PCoIP Host Software was not designed to work on systems with more than one PCoIP Remote Workstation Card and therefore is not supported in such environments. If this is a feature you require, see  Feature Requests and Accelerated Development For …
What happens when a PCoIP Packet is lost in transit?
When a PCoIP packet is lost or considered lost, the PCoIP protocol makes an intelligent decision on if the packet should be re-transmitted. PCoIP packets containing audio and sometimes imaging may never be re-transmitted as the next sample of audio or new …
When accessing the support site, cannot download documents or binaries, and never move past the spinning cursor
Symptoms When downloading documents or binaries associated with PCoIP, the support site shows a spinning circle and eventually times out without showing any content.   Causes The page content contained embedded elements that were blocked by some sites. …
Microsoft update to Full Enforcement Mode - impact to PCoIP Zero Client
Microsoft will implement Full Enforcement Mode of Certificate-based authentication changes on Windows domain controllers in February 2025. We have confirmed there will be no impact to PCoIP Zero Client users and smart card authentication will work even …