How do I choose between remote workstation solutions?
To decide on the most suitable remote workstation solution for your needs, you will need to understand the available options. Remote workstation solutions: Dedicated remote workstation using PCoIP Remote Workstation Cards and PCoIP Zero Clients. See a …
Can I connect a local monitor to computer that has PCoIP Remote Workstation Card or HP Anyware Installed?
Although you may have enough display heads on your GPU to connect local monitors, it is not a supported configuration when using a PCoIP Remote Workstation Card or HP Anyware. Connecting an additional local monitor may cause the following issues: Blank …
What PCoIP GPO settings in VMware Horizon View take effect immediately after the change is made?
Answer: There are currently 4 GPO settings which changes take effect immediately. These are available in Horizon View 5.2 and are listed below along with links to the individual GPO descriptions. In Horizon View 5.3 an additional GPO was added to this …
What network switch or router queue size should be used?
Network device queues, also known as network buffer's, should be configured to accommodate 50ms to 100ms of PCoIP protocol traffic in total. This assumes that one network device (e.g. switch or router) is congested for a given network path. If the network …
Can I replace the PCoIP Management Console's Self-Signed SSL certificate with a certificate signed by a Certificate Authority?
PCoIP Management Console  PCoIP Management Console supports replacement of the default HP Anyware self signed certificate. It is recommended that this certificate be replaced by a certificated signed by a trusted Certificate Authority. For instructions on …