Can I use an Ethernet hub or half-duplex network connection with a PCoIP Zero Client or PCoIP Remote Workstation Card?
No. PCoIP technology requires a full-duplex Ethernet connection from end to end. In modern networks, half-duplex links can still exist when using technologies such as Wi-Fi or point to point Wi-Fi or Microwave links. Older communication equipment in wired …
Knowledge Base Article Troubleshooting Performance Remote Workstation Card Zero Clients
Last modified: March 26, 2021
611
PCoIP Host Driver Software 4.3.1 does not automatically map the PCoIP remote workstation cards in Leostream.
Answer : If you try to automatically map the PCoIP remote workstation card (host card) running PCoIP Host Driver Software 4.3.1 and using the Leostream broker it will fail. If you downgrade the PCoIP Host Driver Software to 4.2.2 it automatically maps. …
Knowledge Base Article Troubleshooting Third Party Enhancements Remote Workstation Card
Last modified: September 14, 2023
570
When does the PCoIP Management Console apply a resolution change using the Enable Preferred Resolution Override setting while in a PCoIP session?
In PCoIP Management Console (MC) 1.9.1 (and newer), PCoIP Zero Clients with firmware 4.1.2 (and newer) can be configured to override the attached monitors native resolution using the Enable Preferred Resolution Override feature. The setting is recognized …
Knowledge Base Article Troubleshooting Management Display Management Console Zero Clients
Last modified: September 3, 2023
571
Error: PCoIP Agent has no available licenses to launch the remote session
Symptom Remote desktops that were previously registered with HP Anyware Cloud License Server (CLS) may get the following client message when trying to connect: “Error – PCoIP Agent has no available licenses to launch the remote session.” In the Anyware …
Knowledge Base Article Advisory Troubleshooting Licensing HP Anyware
Last modified: September 3, 2023
561
No audio when using Unified Communications with a USB headset
Problem Some users have reported no audio when using Unified Communications solution in firmware 4.7.0, they can only hear the ring of the incoming call and when the call is answered there is no Rx/Tx audio.   Cause This issue has been tracked down to the …
Knowledge Base Article Troubleshooting Performance Peripheral Devices Zero Clients
Last modified: November 7, 2022
559