FAQ - What are the required TCP/UDP ports for PCoIP technology?
Answer: The TCP and UDP ports assigned for PCoIP technology are shown in the tables below. Please note that IANA assigned port 4172 to the PCoIP protocol. HP Anyware License Server HP Anyware License Server Port Port Number Direction Description Online …
Knowledge Base Article FAQ Setup HP Anyware Management Console Remote Workstation Card Zero Clients
Last modified: February 17, 2025
52420
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Setting Up Japanese Language and Keyboards
The following tutorial demonstrates how to set up Japanese language and keyboard for Windows PCoIP Software Client and connecting to Microsoft's Japanese Windows Server. Setting up language and keyboard is performed both on the host and client side. Note: …
Knowledge Base Article Tutorial Setup Peripheral Devices HP Anyware Zero Clients
Last modified: November 6, 2024
32116
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Error 6405: PCoIP Agent failed to launch the remote session
Problem When connecting to a HP Anyware PCoIP Agent the client receives the "Error 6405: PCoIP Agent failed to launch the remote session. Please try again. If this failure persists, please report this failure to your system administrator."     Cause The …
Knowledge Base Article Troubleshooting Setup Session HP Anyware
Last modified: March 5, 2025
26513
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
À quoi sert l’adresse IP de secours ?
La carte PCoIP Zero Client ou PCoIP Remote Workstation est configurée sur ses paramètres d’usine par défaut. Par défaut, le périphérique PCoIP est en mode DHCP. Parce qu’il est en mode DHCP, lorsqu’il est connecté pour la première fois à un réseau, il …
Knowledge Base Article Tutorial Setup Remote Workstation Card Zero Clients
Last modified: February 17, 2025
24254
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
What is the fallback IP address used for?
Out of the box, the PCoIP Zero Client or PCoIP Remote Workstation Card is configured to its factory default settings. By default, the PCoIP device is in DHCP mode. Because it is in DHCP mode, when it is first connected to a network, it tries to obtain a …
Knowledge Base Article Tutorial Setup Remote Workstation Card Zero Clients
Last modified: February 17, 2025
24254
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
TROUBLESHOOTING USB peripherals
This article provides a brief list of troubleshooting steps for common issues involving USB peripherals (e.g. DVD drives/burners, keyboards, mice, usb, smart phones, storage devices, hard drives, scanners, printers). This is not intended to be a …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card HP Anyware Zero Clients
Last modified: November 30, 2024
22890
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
What versions of VMware Horizon does the PCoIP Zero Client Firmware support and is pre-certified with?
Support PCoIP firmware is supported with the publicly available Horizon release available at the time of the firmware release and is compatible with one major release of Horizon prior to this. Further information for each release can be found via their …
Knowledge Base Article Advisory Setup Third Party Enhancements Zero Clients
Last modified: July 22, 2024
21361
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
HP Anyware Instructions for Consumer Grade NVIDIA GPUs (e.g. GeForce RTX 2080)
Overview  The purpose of this document is to outline key components, installation instructions and important notes of  HP Anyware on physical workstations with consumer grade NVIDIA GPUs.  NOTE: This document is intended for NVIDIA consumer grade GPUs. …
Knowledge Base Article Tutorial Setup HP Anyware Remote Workstation Card
Last modified: November 30, 2024
19154
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
How do I bridge a USB device on a PCoIP Zero Client?
PCoIP Zero Clients locally terminate HID USB devices when connecting to: VMware View virtual desktops, or PCoIP Remote Workstation Cards (host cards) on systems where the PCoIP Host Software is installed and the Local Cursor and Keyboard feature is …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: September 3, 2023
17963
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Troubleshooting Keyboard and Mouse issues
Problem When connecting to a remote session the keyboard and mouse do not work, the input is sporadic, the input lags, the cursor doesn't appear or the mouse is out of position.   Cause There are many causes for Keyboard and Mouse issues. They include: …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card HP Anyware
Last modified: September 21, 2023
15331
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5