Search

What network switch or router queue size should be used?

Network device queues, also known as network buffer's, should be configured to accommodate 50ms to 100ms of PCoIP protocol traffic in total. This assumes that one network device (e.g. switch or router) is congested for a given network path. If the network …

What PCoIP GPO settings in HP Anyware take effect immediately after the change is made?

Whist all GPO settings are read and take effect at the start of a PCoIP session, some GPO settings will also take effect during the session. For HP Anyware 2.13 and above: Configure build-to-lossless Configure PCoIP event log verbosity Configure PCoIP …

Knowledge Base Article Advisory Setup HP Anyware

Last modified: September 7, 2023

502

What PCoIP GPO settings in VMware Horizon View take effect immediately after the change is made?

Answer: There are currently 4 GPO settings which changes take effect immediately. These are available in Horizon View 5.2 and are listed below along with links to the individual GPO descriptions. In Horizon View 5.3 an additional GPO was added to this …

What SFP modules have HP Anyware tested with the PCoIP Zero Client and PCoIP Remote Workstation Card?

Warning: This is not a comprehensive list and contains modules that have been tested and/or deployed successfully in client environments. Since SPF modules are built by different manufacturers which may implement different engineering designs, it is …

Knowledge Base Article Advisory Setup Zero Clients

Last modified: September 14, 2023

976

What should I consider when using Network Emulation to Simulate a WAN Network?

Network Emulation Simulation Considerations While network emulation tools can be useful to test PCoIP protocol performance over simulated WAN networks by limiting network bandwidth, injected latency and packet loss etc, we recommend not using the packet …

What type of slot is required to install a PCoIP Remote Workstation Card?

A PCoIP Remote Workstation Card can be inserted into a PCIe x1, x4, x8, or x16 slot. Be sure that the host PC/workstation has a spare PCIe slot and that the PCoIP Remote Workstation Card is properly inserted into a PCIe slot, not a PCI slot. Note: In …

What types of USB devices are supported in Linux with the PCoIP Remote Workstation Card?

The Tera2 PCoIP Remote Workstation Card presents a Open Host Controller Interface (OHCI) and Enhanced Host Controller Interface (EHCI), supporting the USB 1.0 and USB 2.0 specifications respectively, via the PCIe 1x connector to the motherboard. If is up …

What USB CD/DVD drives should I consider using with PCoIP Zero Clients?

Teradici does not maintain a list of tested units. With the introduction of EHCI (USB 2) functionality, compatibility with currently manufactured DVD brands has improved greatly, particularly when the PCoIP Zero Client or PCoIP Remote Workstation Card …

What virtual channels are currently supported by PCoIP Zero Clients?

Listed below, are the 2 VC's (virtual channel) currently supported. Between VMware Horizon View and PCoIP Zero Client OneSign: The virtual channel name is IMP1166 , which was selected by Imprivata. It is used to relay prox card events from the virtual …

Knowledge Base Article Advisory HP Anyware Zero Clients

Last modified: September 21, 2023

780

When are PCoIP session statistics reset on a PCoIP Zero Client?

Session statistics are reset at the start of each PCoIP session, i.e. when a session is connected. You can also reset them during a session through the AWI under Diagnostics, Session Statistics, Reset Statistics. … When are PCoIP session statistics …

Search

Type

Product

Publish Date