Does PCoIP Protocol support half duplex networking equipment?

Rate this Article
No votes yet

July 3, 2020

Last modified: 07/03/2020, 1:40 am

Knowledge Base Article Advisory Performance Remote Workstation Card Zero Clients

PCoIP protocol does not support half-duplex network equipment. If a half-duplex equipment is connected to a PCoIP Remote Workstation Card or PCoIP Zero Client, the following message shows in the Event Log.

0d,00:04:05.710> Network link rate: 10 Mbit/s, duplex: HALF

PCoIP technology requires full-duplex network connection (shown in the following example):

0d,00:07:43.900> Network link rate: 100 Mbit/s, duplex: FULL

or 

0d,00:04:05.710> Network link rate: 1000 Mbit/s, duplex: FULL