FAQ - What are the required TCP/UDP ports for PCoIP technology?

Answer:

The TCP and UDP ports assigned for PCoIP technology are shown in the tables below.

Please note that IANA assigned port 4172 to the PCoIP protocol.

HP Anyware License Server

HP Anyware

The following Ports are required for the HP Anyware

PCoIP Management Console Port for PCoIP Devices

The information below summarizes the ports used by the PCoIP Management Console to manage PCoIP hardware devices.

The following additional ports are required for the Management Console.

PCoIP Zero Clients

For PCoIP Zero Client to PCoIP Remote Workstation Card connections, the PCoIP protocol uses the following ports:

Note: For more on NAT environments, see Using Network Address Translation (NAT) with PCoIP Zero Client and Remote Workstation Cards.

For PCoIP Zero Client to VMware View connections, the PCoIP protocol uses the following ports:

VMware Horizon View - PCoIP Component

Consider this port number when transitioning between View 4.0.x and View 4.5 (or later).
 

Other VMware View Agent Ports:

To use both a PCoIP Zero Client and a PCoIP Remote Workstation Card (in a workstation or physical PC) with VMware View, the PCoIP protocol uses these additional ports:
 

To connect with a Horizon (View) Client, the following additional port is used:

Note: For more information, see Network connectivity requirements for VMware View Manager 4.5 and later (1027217).

Notes:

* Ports not visible if the PCoIP session uses IPSEC ESP packet format.
** Optional
*** Applicable to firmware release 1.x, 2.x, 3.x