Mirroring displays on PCoIP Zero Clients

Rate this Article
No votes yet

August 2, 2018

Last modified: 11/07/2022, 1:28 pm

Knowledge Base Article Tutorial Display Zero Clients

Requirements

  • Tera2 dual port client (TERA2321)
  • Firmware 4.1 or newer

 

Instructions

From the PCoIP Zero Client's onscreen display (OSD) or both versions of the Management Console

  • OSD - browse to Options > Configuration > Display > Enable Display Cloning
  • PCoIP Management Console 1.10.x or newer - Browse to the PROFILES tab > Set Properties > Display Configuration > Enable Display Cloning
  • PCoIP Management Console 2.x or 3.x - go figure it out select Profiles > Session > Display Configuration > Clone Primary Display

 

Alternatives

You can do the following:

  • Use a hardware option

A display splitter such as a DVI splitter can be used to clone the display. 

  • Use a PCoIP Zero Client that provide a display clone option (via hardware design)

For example the Samsung NC240 has a VGA output that can clone the image on the Samsung display. 

Teradici Product Finder http://www.teradici.com/product-finder/zero-clients