Recovering the OSD when the resolution was set to 800x600 or lower which removed functionality.
This occurs because these low resolutions do not display the OSD correctly, and access to some configurations are lost. Previously this was not an available feature which prevented devices being put into un-configurable states by setting resolutions to 800x600 or smaller. Setting resolutions greater than or equal to 1024x768 on integrated displays is possible using firmware 4.1.2 and newer.
Use the Management Console (MC) to change the preferred resolution of integrated displays. The MC interface is not affected by the low resolution in the same manner as the OSD is.
For configuration changes please see the PCoIP Zero Client Firmware Administrators' Guide (GUI Reference > Configuring Monitor Emulation and Display Settings > MC: Display Settings)
Set the "Preferred Override Resolution for all ports (regardless of how many they actually use). If required, the resolution can be reverted by setting the Preferred Override Resolution to "Native" and applying the profile.
This option is available starting with firmware version 4.1.2 and with Management Console 1.9.1.
The latest version of firmware and the PCoIP Management Console is recommended.
Pertains to:
- PCoIP Zero Client 4.0.2
- PCoIP Zero Client 4.0.3
- PCoIP Zero Client 4.1.0
- PCoIP Zero Client 4.1.1
- PCoIP Zero Client 4.1.2
- PCoIP Zero Client 4.2.0
- PCoIP Zero Client 4.5.0
- PCoIP Zero Client 4.5.1
- PCoIP Zero Client 4.6.0
- PCoIP Zero Client 4.7.0
- PCoIP Zero Client 4.7.1
- PCoIP Zero Client 4.8.0
- PCoIP Zero Client 4.8.1
- PCoIP Zero Client 4.8.2
- PCoIP Zero Client 5.0.0
- PCoIP Zero Client 5.0.2
- PCoIP Zero Client 5.1.0
- PCoIP Zero Client 5.1.1
- PCoIP Zero Client 5.2.0
- PCoIP Zero Client 5.2.1
- PCoIP Zero Client 5.2.2
- PCoIP Zero Client 5.3.0
- PCoIP Zero Client 5.4.0
- PCoIP Zero Client 5.4.1
- PCoIP Zero Client 5.5.0
- PCoIP Zero Client 5.5.1
- PCoIP Zero Client 6.0.0