What SFP modules have HP Anyware tested with the PCoIP Zero Client and PCoIP Remote Workstation Card?

Rate this Article
No votes yet

July 3, 2020

Last modified: 09/14/2023, 7:56 am

Knowledge Base Article Advisory Setup Zero Clients

Warning: This is not a comprehensive list and contains modules that have been tested and/or deployed successfully in client environments. Since SPF modules are built by different manufacturers which may implement different engineering designs, it is highly recommended that specific SFP units are tested prior to purchasing large quantities or deployment to ensure compatibility with your environment.

 

Contact your OEM for further details regarding SFP modules.

 

Note: The Ethernet port or PHY on a zero client or on the HP Anyware  PCoIP Remote Workstation Card support single-mode or multi-mode fiber modules that are compliant to the 1000BASE-X and 100BASE-X specifications. There is no speed negotiation on the external interface of the SFP.

The following is a list of SFP modules that work in PCoIP Tera1 Zero Client devices:

  • Avago AFBR-5710PZ (fiber)
  • Avago HFBR 57E0PZ (fiber)
  • Cisco GLC-T (copper)
  • Finisar FTLF8519P2BNL (fiber)
  • MRV SFP-SW10/100-R (copper - 100 Mb ONLY)
  • Sanoc SI8512-X5AT0S (fiber)

The following is a list of tested SFP modules that DO NOT work in PCoIP Tera1 zero client devices:

  • LCP-1250RJ3SR-S-A (copper)
  • GLC-GE-100FX (fiber)

 The following is a list of SFP modules that work in PCoIP Tera2 zero client devices:

  • ADDON GLC-SX-MM-AO (fiber)
  • ADDON SFP-TX (copper)
  • Avago 100X HFBR57E0PZ (fiber)
  • Avago ABCU-5710RZ (fiber)
  • D-LINK DEM-211 (fiber)
  • Finisar FTLF8519P2BNL (fiber)
  • Finisar FCLF-8521-3 (copper)
  • MRV SFP-SW10/100-R (copper - 100 Mb ONLY)
  • Sanoc SI8512-X5ATOS (fiber)
  • Source Photonics SP-GB-TX-CNFM (copper)
  • Source Photonics SPS-43-GB-BX-CDFF (fiber)
  • Source Photonics SPS-34-GB-BX-CDFF (fiber)
  • Source Photonics SP-GB-SX-CNFB (fiber)
  • Source Photonics FTM-C001R-LG (copper)
  • Sunkind SKC-BIDI (fiber/copper media convertor)
  • Sunkind SKI-850_X5 (copper)

 

Teradici strongly recommends that you test your SFP module in any PCoIP endpoint device prior to purchasing.