What is monitor emulation on the PCoIP Remote Workstation Card and how does it work?
Answer: Monitor emulation is a feature on the PCoIP Remote Workstation Card (also known as a host card) that ensures graphics cards see a valid EDID on a Display Port or DVI port on boot. This helps prevent the graphics card from driving DVI signals or DP …
Knowledge Base Article Advisory Display Setup Remote Workstation Card
Last modified: September 3, 2023
2360
What are the factory default network settings for PCoIP Zero Clients and PCoIP Remote Workstation Cards?
Answer: An OEM may change the factory default network settings. Please refer to your OEM's manual for detailed information. Most devices generally have the following factory default network settings: DHCP enabled Fallback IP address (PCoIP Remote …
Knowledge Base Article Advisory Setup Remote Workstation Card Zero Clients
Last modified: September 3, 2023
2357
How does the PCoIP Zero Client/PCoIP Remote Workstation Card support remote power management?
Answer: This article describes how to remotely power down a host PC/workstation with a PCoIP Remote Workstation Card (i.e. host card) installed, and how to remotely power it up with wake on LAN (WOL). Note: VMWare View brokered connections do not support …
Knowledge Base Article Tutorial Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
2300
Host Session Health Check - Diagnostics and troubleshooting guide
Summary To receive a detailed host diagnostic report, create a host  support/log file bundle  and then submit this bundle to the PCoIP  health check   tool.  Once the files are submitted, it will take 5-10 minutes to produce a detailed report.  The report …
Knowledge Base Article Diagnostics Session Remote Workstation Card HP Anyware
Last modified: October 15, 2024
2292
"No PCoIP devices detected. Please ensure the hardware is installed and the Host Driver Function is enabled on the PCoIP Host card prior to installing the software"
  Problem When installing host software on a PC, the following error message may be displayed: "No PCoIP devices detected. Please ensure the hardware is installed and the Host Driver Function is enabled on the PCoIP Host card prior to installing the …
Knowledge Base Article Troubleshooting Setup Remote Workstation Card
Last modified: October 19, 2022
2180
DHCP IP address lease changes when the PCoIP Zero Client firmware or PCoIP Remote Workstation firrmware is upgraded
Problem Updating PCoIP Zero Client firmware or PCoIP Remote Workstation Card firmware results in a new DHCP IP address lease. The issue will only occur under the following circumstances: Updating a PCoIP Zero Client from firmware 4.7.1 and prior to 4.8.0 …
Knowledge Base Article Troubleshooting Setup Remote Workstation Card Zero Clients
Last modified: September 12, 2023
2038
Can I connect a PCoIP Zero Clients and Remote Workstation Cards via wireless network?
There are a number of options to consider for wireless connection of PCoIP devices such as PCoIP Zero Clients and PCoIP Remote Workstation cards.  Wireless Access Point Use a wireless access point (wireless bridge) to connect a PCoIP Zero Client or PCoIP …
Knowledge Base Article Advisory Setup Remote Workstation Card Zero Clients
Last modified: September 4, 2023
1911
I can't see or access PC/workstation BIOS when using a PCoIP Remote Workstation Card?
Problem When remotely access my a workstation using the PCoIP Remote Workstation Card, the BIOS is not visible remotely and when it is, can't be controlled.   Cause In order to access the BIOS when using a PCoIP Remote Workstation Card, the USB function …
Knowledge Base Article Tutorial Display Remote Workstation Card
Last modified: September 3, 2023
1901