Mirroring displays on PCoIP Zero Clients
Requirements Tera2 dual port client (TERA2321) Firmware 4.1 or newer   Instructions From the PCoIP Zero Client's onscreen display (OSD) or both versions of the Management Console OSD - browse to Options > Configuration > Display > Enable Display Cloning …
Knowledge Base Article Tutorial Display Zero Clients
Last modified: November 7, 2022
1428
How do I enable IEEE 802.1x Network Authentication in PCoIP Zero Clients and PCoIP Remote Workstation Cards?
1) Identify the certificates used for IEEE 802.1x network authentication in your organization 2) Ensure that the certificates are properly formatted Certificates must be in .PEM format and less than 6 KB Both a client certificate and a server root CA …
Knowledge Base Article Tutorial Security Management Console Zero Clients
Last modified: September 5, 2023
1413
Why is USB not working when connecting a PCoIP Zero Client to a PCoIP Remote Workstation Card?
By default, all USB devices are bridged to the host with the PCoIP Remote Workstation Card and is dependent on the host OS. Please verify the following Make sure the USB devices are not unauthorized in the PCoIP Remote Workstation Card or PCoIP Zero …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card Zero Clients
Last modified: September 3, 2023
1406
What USB CD/DVD drives should I consider using with PCoIP Zero Clients?
Teradici does not maintain a list of tested units. With the introduction of EHCI (USB 2) functionality, compatibility with currently manufactured DVD brands has improved greatly, particularly when the PCoIP Zero Client or PCoIP Remote Workstation Card …
Knowledge Base Article Advisory Peripheral Devices Zero Clients
Last modified: September 3, 2023
1393
Why is the mouse pointer no longer visible when you bridge a pointer device on a PCoIP Zero Client?
Problem When using Teradici firmware version 4.5.1 and newer, after bridging the pointer device, the pointer is no longer visible on screen. Note: This does not apply to a connection to a PCoIP Remote Workstation Card.   Cause Firmware 4.5.1 and newer …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 20, 2023
1386
Why do I hear pops and crackles or dead air in my PCoIP session when connecting with a PCoIP Zero Client?
This article refers to the audio playback using the PCoIP Analog Audio Data Channel from a host machine to a PCoIP Zero Client. It does not apply to microphone input from a PCoIP Zero Client to a VM.   Problem The PCoIP Zero Client must have either an …
Knowledge Base Article Troubleshooting Performance Zero Clients
Last modified: December 20, 2023
1373