How many VMware View pools are supported by PCoIP Zero Clients?
PCoIP Zero Clients support up to 10 desktop pools when using Firmware 3.2.0 or earlier.  Firmware 3.3.0 and later increased support for the number of pools to 100. When more than 100 pools are configured, the PCoIP Zero Client becomes unresponsive for a …
Knowledge Base Article Advisory Third Party Enhancements Zero Clients
Last modified: September 14, 2023
990
Mouse cursor does not change when using PCoIP Zero Clients to connect to a VM using View Agent 7.4.
Scenario:  This is most visible in Office (especially MS Excel) application but occurs in applications or windows that require a cursor change such as changing the column widths in Excel. This event can be identified in the zero client log file with the …
Knowledge Base Article Troubleshooting Third Party Enhancements Zero Clients
Last modified: September 21, 2023
989
What SFP modules have HP Anyware tested with the PCoIP Zero Client and PCoIP Remote Workstation Card?
Warning:  This is not a comprehensive list and contains modules that have been tested and/or deployed successfully in client environments. Since SPF modules are built by different manufacturers which may implement different engineering designs, it is …
Knowledge Base Article Advisory Setup Zero Clients
Last modified: September 14, 2023
989
Where can I find the Imprivata OneSign Appliance verification setting on a PCoIP Zero Client?
Answer: The verification setting is located in the PCoIP Zero Client session tab under the Advanced settings. The OneSign Appliance Verification option will only appear in the Advanced options if the Session Connection Type is correctly selected as shown …
Knowledge Base Article Troubleshooting Session Security Zero Clients
Last modified: April 19, 2023
989
Why is my display not working correctly when using an adaptor attached to my OEM supplied cable?
Problem After purchasing a HP Anyware product you discover the cable shipped with the HP Anyware product does not have the necessary Video/Display connector to interface with your GPU or monitor. To complete the connection an adaptor is used to change the …
Knowledge Base Article Troubleshooting Display Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
980
How do I configure a Peer-to-Peer Connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card?
Requirements This article describes the configuration of a peer-to-peer, or dedicated connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card including dual and quad display scenario's. Single or dual display requires a single PCoIP …
Knowledge Base Article Tutorial Session Setup Remote Workstation Card Zero Clients
Last modified: July 31, 2018
932
Why does the dual-link DVI monitor connected to my PCoIP Zero Client not display properly?
Check your DVI cable, it may not be dual-link capable. Dual-link cable ends have all of the pins populated whereas single-link cables are missing 6 pins. These pins carry the extra information to allow up to 2560 x 1600 resolution. Some monitors will …
Knowledge Base Article Troubleshooting Display Zero Clients
Last modified: November 22, 2022
894
What PCoIP GPO settings in VMware Horizon View take effect immediately after the change is made?
Answer: There are currently 4 GPO settings which changes take effect immediately. These are available in Horizon View 5.2 and are listed below along with links to the individual GPO descriptions. In Horizon View 5.3 an additional GPO was added to this …
Knowledge Base Article Advisory Setup Performance Third Party Enhancements Zero Clients
Last modified: September 3, 2023
870