Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

Why has my PCoIP session disconnected and my VM restarted?

If your PCoIP session has disconnected and your VM has restarted, it may be possible the Windows update settings are set to Install updates automatically. If configured as such, consider using Download updates but let me choose whether to install them to …

Knowledge Base Article Tutorial Session HP Anyware

Last modified: December 9, 2022

274

Management Console profile is not applied to the Remote Workstation Card

Applying a Profile to a Remote Workstation Card from PCoIP Management Console will be unsuccessful if the Enable Audio setting on the Remote Workstation Card has never been enabled (default is disabled) or the Remote Workstation Card has not had the …

When are PCoIP session statistics reset on a PCoIP Zero Client?

Session statistics are reset at the start of each PCoIP session, i.e. when a session is connected. You can also reset them during a session through the AWI under Diagnostics, Session Statistics, Reset Statistics. … When are PCoIP session statistics …

Does the PCoIP Management Console 2.x and 3.x ship with a default certificate?

Yes. The PCoIP Management Console since release 2.x ships with a HP Anyware self-signed certificate to allow the PCoIP Management Console to function out of the box. It is recommended that all users deploying the PCoIP Management Console 2.x or …

Can I use Cisco Express Forwarding per-packet load sharing with PCoIP Protocol?

No, Cisco Express Forwarding (CEF) per-packet load sharing causes out-of-order packets which is not compatible with real-time protocols such as PCoIP Protocol. Cisco has similar recommendations against CEF per-packet load sharing when using Voice-over-IP …

What are the priorities for video, audio, and USB PCoIP traffic?

PCoIP technology gives priority to USB and audio, while imaging uses remaining available bandwidth. PCoIP technology optimizes user experience for a given bandwidth by adaptively controlling quality and update rate of the image data, and optionally …

Recovering the OSD when the resolution was set to 800x600 or lower which removed functionality.

This occurs because these low resolutions do not display the OSD correctly, and access to some configurations are lost. Previously this was not an available feature which prevented devices being put into un-configurable states by setting resolutions to …

Does the PCoIP Zero Client have left hand mouse configuration settings?

The PCoIP Zero Client currently has no specific left hand mouse setting. The PCoIP Zero Client configuration options in the OSD were designed to negate the necessity for right hand or left hand functionality therefore both buttons act the same. Right hand …

Is there any information left on my PCoIP Zero Client after a reset is performed?

When a PCoIP Zero Client is factory reset, the following information will still reside in flash: If a PCoIP Zero Client is connected to a network during the reset process, the logs will catch the normal network information on start up as part of its …

Knowledge Base Article Tutorial Security Zero Clients

Last modified: November 18, 2022

251

Can I share the network connection of the PCoIP Remote Workstation Card with that of the host PC/workstation?

No, the network interface on the PCoIP Remote Workstation Card is independent to that of the host. It is not possible to communicate to the host operating system via the PCoIP Remote Workstation Card network interface. Therefore, you must connect both the …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics