Does the Phillips Digital Pocket Memo work with a PCoIP Zero Client and VMware Horizon View?
Scenario A Philips Digital Pocket Memo (DPM) device does not operate after connecting to a PCoIP Zero Client using the USB EHCI controller (USB 2.0). Occasionally the PCoIP Zero Client unexpectedly restarts.   Cause The Philips Digital Pocket Memo device …
How can I tell if the 802.1x certificate uploaded successfully?
A good test is to use the web UI to upload the 802.1x certificate. From the web UI, go to Upload> Certificate and view the screen. If the certificate is listed after a restart of the PCoIP Zero Client then the certificate was uploaded successfully (see …
How do I make PCoIP Remote Workstation Card USB devices work on my Fujitsu CELSIUS R930 workstation?
Answer: If USB devices won't work on a R930, move the PCoIP Remote Workstation Card to a PCIe slot that is serviced by a populated CPU socket. Why this is necessary: The R930 has two sockets. If the unit ships with only one socket populated (a single …
After activating a renewal license on my Management Console, it is showing the old expiry date, how do I fix?
Problem: I have renewed by license for the Management Console however after deactivating and reactivating the license on my Management Console, it is showing old expiry date.  Answer : To solve this issue you need to do the following steps: 1) Return the …
Why can a session not be establish after a user disconnects while the Windows "waiting for programs to close" dialog is showing?
Problem When disconnecting a PCoIP session while Windows is shutting down or a user account is logging off with the "waiting for programs to close" dialog is showing; the ability to reconnect the PCoIP session is lost.    Cause When Windows is shutting …
How does PCoIP share bandwidth over the network?
The BW Limit is dynamically calculated and represents the bandwidth the PCoIP session estimates to be available given the network conditions. The calculation takes into account the existing bandwidth usage, packet loss and any high latency spikes. The …
Why do I get poor performance on an MPLS network?
There are a number of configuration requirements for using PCoIP protocol on an MPLS network.  Prioritize PCoIP packets as a best practice Avoid packet loss Avoid out-of-order packets PCoIP protocol may consider out-of-order packets as lost if the data …
Why doesn't the PCoIP Remote Workstation Card power up when it is installed to a particular PCIe slot?
This may be due to the restrictions of your host PC's motherboard that requires you to install graphics cards or other PCIe cards into certain PCIe slots. If a PCIe card is installed into an inappropriate PCIe slot, the host PC may stop loading any …
PCoIP Management console 2.x or 3.x license activation fails with error "Operations error: 0 That activation request yields no right to a license".
Problem When you try to activate the PCoIP Management Console license with this command "/opt/teradici/licensing/mc_activate_lic.sh -k ", You get the error "Operations error: 0 That activation request yields no right to a license".   …