How do I fix the unsecure browser warning when accessing the PCoIP Management Console web interface?
Problem When accessing the Management Console web interface the web browser displays a message such as "This site is not secure", "Your connection is not secure" or "Your connection is not private"   Cause The web browser cannot validate the security …
Knowledge Base Article Troubleshooting Security Management Console
Last modified: September 3, 2023
1759
What does "No Available Hosts for Connection" mean?
The message "No Available Hosts for Connection" appears if the PCoIP Zero Client has enabled the Host Discovery feature and tries to establish a session but cannot find a PCoIP Remote Workstation Card that is not currently in a session on the network. If …
Knowledge Base Article Troubleshooting Session Remote Workstation Card Zero Clients
Last modified: November 15, 2022
1748
How do I avoid the red "HTTPS" in server address in the Connection Dialog on a PCoIP Zero Client?
All HP Anyware and VMware View 5.1 or newer has connection security requirements that are supported in PCoIP Zero Client firmware 4.0.0 or newer.  There are multiple scenario's with the certificate check that can result in a warning message and/or a red   …
Knowledge Base Article Troubleshooting Security Zero Clients
Last modified: September 3, 2023
1741
How do I fix a problem with a USB mouse and keyboard not working on a Dell Precision R7610 workstation?
Answer: Dell fixed a known issue with the USB keyboard and mouse on Dell Precision R7610 workstations. The problem can happen on any Dell Precision workstation when connected to any PCoIP Zero Client. The issue was fixed in Dell BIOS A07. For more details …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card
Last modified: September 3, 2023
1737
How can I determine the frame rate at a PCoIP protocol client?
Answer: There are a multiple ways to determine the frame update rate displayed at the PCoIP Zero Client.    Note: the frame rate displayed at the client this may be different than the source display frame rate when in a congested network environment.  Log …
Knowledge Base Article Tutorial Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: September 3, 2023
1738
Display resolution, topology, image artifacts or rendering-performance issues in HP Anyware with a GPU
Symptoms If you are using HP Anyware's Graphics agents with a GPU, either Nvidia GRID or AMD FirePro, the following issues may be caused by incorrect GPU driver: Image tearing Image artifacts Slow connection times Display topology issues Low frame rates …
Knowledge Base Article Troubleshooting Display Performance HP Anyware
Last modified: September 15, 2023
1727
Why is the BIOS not visible when my Dell workstation boots with a PCoIP Remote Workstation Card?
Scenario The BIOS on a Dell R5500/R5400 is not visible on boot up. After the OS loads, the monitor then displays the desktop. On some graphic cards, only the primary port is active during the POST phase of the host PC boot process. For example, when using …
Knowledge Base Article Troubleshooting Setup Display Remote Workstation Card
Last modified: September 3, 2023
1687
How do I optimize the Windows 7 desktop experience settings to reduce PCoIP session bandwidth?
Answer: On a Microsoft Windows 7 machine, make the following change to the Windows optimization settings: Start > Computer > System Properties > Advanced System Properties > Performance Settings button > Adjust for best performance . Alternatively, you …
Knowledge Base Article Tutorial Performance HP Anyware Zero Clients
Last modified: September 20, 2023
1677