Authentication failures with my eToken/smartcard device and VMware Horizon
Prerequisites eToken devices work based on the scenario in which they are intended to be used and the proper installation of the PCoIP Smartcard feature. Three scenario's are described below after the PCoIP Smartcard installation: PCoIP Smartcard …
What are the jumpers and LEDs on the Tera2 PCoIP Remote Workstation Card used for?
All external connectors on Tera2 PCoIP host cards are for diagnostic purposes. Jumpers J15 and J25 are configurable and their functions are described below. If you want Tera1 jumper explanations instead, refer to  What are the jumpers on the Tera1 host …
Troubleshooting USB device issues with USBlyzer
USBlyzer USBlyzer is a software protocol analyzer that can be used to observe USB traffic from the host perspective. It may be useful debugging cases where a device is plugged in successfully (it can be seen in Device Manager) but for some reason doesn't …
HP Anyware Agent: Error 6405 in macOS version of the agent
PROBLEM When the macOS agent machine had been rebooted, the PCoIP software client is seeing: Error 6405: PCoIP Agent failed to launch the remote session. Please try again. If this failure persists, please report this failure to your system administrator. …
Why do I get a gray screen when connecting from the HP Anyware PCoIP Software Client to a PCoIP Remote Workstation Card?
Answer: To resolve this issue, please make sure that you have the following installed and set correctly on the host PC/workstation - i.e. a computer with a PCoIP Remote Workstation Card (host card) installed: The host card should be running PCoIP firmware …
How do I access CTRL-ALT-DEL on a touchscreen monitor with Windows 7?
Answer: In Windows 7 environments where a touchscreen monitor uses the onscreen keyboard, consider enabling CTRL+ALT+ DEL, also known as the Secure Attention Sequence (SAS): Log in to the remote workstation or virtual desktop with the appropriate …
What is the difference between pre-session and post-session(in-session) smart card operation?
Answer: The difference between pre-session and post-session smart card operation is when the smart card is used for authentication during the log-in process.  Pre-session smart card operation: The smart card is used prior to the user establishing …
What does the "Network Link Down" message in the Event Log mean?
Problem A PCoIP Zero Client or PCoIP Remote Workstation Card is having intermittent or persistent problems maintaining a connection to the network. The logs repeatedly contain the message: 0d,00:00:05.42> LVL:2 RC: 0 MGMT_NET :Network link DOWN   Cause …
Troubleshooting PCoIP Display Issues
This article provides  general troubleshooting steps for performance issues when remoting virtual desktops. Scenarios covered include: Video slicing or tearing. Screen (or parts of the screen) becomes fuzzy screen and then clears up. Slow screen updates. …
What are the requirements to support pre-session smart card authentication when connecting to VMware Horizon (View)?
Note: With the release of PCoIP Zero Client firmware 6.1.0, the information in the knowledge base article has been moved into the PCoIP Zero Client Administrators' guide to ensure the list is current at the time of each firmware release. See PCoIP Zero …