Will the PCoIP Agent work with more than one network interface?
Problem The PCoIP Graphics and Standard agent can be used on a host with more than one network interface. This may or may not work out of the box depending on the order of the network interfaces. Multiple network interfaces may exist in many systems due …
Knowledge Base Article Troubleshooting Session Setup HP Anyware
Last modified: March 30, 2024
2734
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Why did I lose my display topology settings on my PCoIP Zero Client?
Problem After powering off a monitor or unplugging a display cable, the resolution changes to native resolution, the rotation is lost and my primary monitor changed. These are the two relevant OSD display configurations: Display Topology  (OSD > User …
Knowledge Base Article Troubleshooting Display Zero Clients
Last modified: September 3, 2023
2710
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
MFA (Multi Factor Authentication) options are not being displayed on the PCoIP Zero Client when authenticating to a VMware Horizon View Connection Server
Problem MFA (Multi Factor Authentication) options are not being displayed on the PCoIP Zero Client when authenticating to a VMware Horizon View Connection Server. The MFA challenge is only showing a short prompt regardless of which option you have …
Knowledge Base Article Troubleshooting Security Third Party Enhancements Zero Clients
Last modified: September 18, 2024
2662
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
PCoIP Logs Explained: "-504 MGMT_PCOIP_DATA Unable to communicate with peer on PCoIP media channels (data manager ping timer expired)" in the PCoIP server logs
Problem The PCoIP Session unexpectedly disconnects, investigation into the logs show: 2011/04/16 10:20:52.606   1  -504   MGMT_PCOIP_DATA    Unable to communicate with peer on PCoIP media channels (data manager ping timer expired)   Cause Inside the PCoIP …
Knowledge Base Article Troubleshooting Session Zero Clients HP Anyware
Last modified: September 4, 2023
2531
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
PCoIP Management Console 2.x and 3.x web interface error message - Waiting for the server to start
Problem When accessing the PCoIP Management Console web interface the message "Waiting for server to start" appears.   Cause This message is displayed anytime the daemon and web service components stop communicating with each other. There are a number of …
Knowledge Base Article Troubleshooting Management Console
Last modified: March 28, 2024
2483
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
"No PCoIP devices detected. Please ensure the hardware is installed and the Host Driver Function is enabled on the PCoIP Host card prior to installing the software"
  Problem When installing host software on a PC, the following error message may be displayed: "No PCoIP devices detected. Please ensure the hardware is installed and the Host Driver Function is enabled on the PCoIP Host card prior to installing the …
Knowledge Base Article Troubleshooting Setup Remote Workstation Card
Last modified: October 19, 2022
2267
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Why does the PCoIP Zero Client not trusting my connection to a system with a new certificate?
Problem The PCoIP Zero Client produces a certificate error when connecting to a HP Anyware PCoIP Agent, PCoIP Connection Manager, PCoIP Security Gateway after the certificate has been renewed and signed by the same Root CA or Intermediate CA as the old …
Knowledge Base Article Troubleshooting Security HP Anyware Zero Clients
Last modified: September 3, 2023
2220
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
DHCP IP address lease changes when the PCoIP Zero Client firmware or PCoIP Remote Workstation firrmware is upgraded
Problem Updating PCoIP Zero Client firmware or PCoIP Remote Workstation Card firmware results in a new DHCP IP address lease. The issue will only occur under the following circumstances: Updating a PCoIP Zero Client from firmware 4.7.1 and prior to 4.8.0 …
Knowledge Base Article Troubleshooting Setup Remote Workstation Card Zero Clients
Last modified: September 12, 2023
2135
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
License Activation with the PCoIP Management Console 2.x and 3.x fails with "ERROR: flxActAppActivationSend - (50041,41143,34)"
Problem License activation is failing with:  [root@localhost admin]# /opt/teradici/licensing/mc_activate_lic.sh -k 1234-5678-90AB-CDEF Activation Failed. Please verify your activation key. Running with debug output enabled (-d TRUE) may be helpful. …
Knowledge Base Article Troubleshooting Licensing Management Console
Last modified: September 3, 2023
2082
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
What does a NACK or NAK log entry indicate?
Negative Acknowledgement PCoIP imaging will acknowledge or use selective acknowledgement in newer PCoIP implementations, to signal to the PCoIP Host that imaging data was successfully received and displayed. In the event that this process is not …
Knowledge Base Article Troubleshooting Performance Remote Workstation Card HP Anyware
Last modified: July 27, 2023
2082
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5