Skip to content

Configuring Power Settings

Setting Default AWI OSD Management Console
OSD Screen Saver Timeout
Display Suspend Timeout
Auto Power-Off Timeout
Remote Host Power Control
Power On After Power Loss
Enable Wake-on-USB
Enable Wake-on-LAN

From the OSD and AWI Power pages as shown next, you can configure timeout and power settings for the device. Alt text
OSD Power page

Alt text
AWI Power page

The following settings display on the OSD and AWI Power pages:

Power Parameters

Parameter Description
OSD Screen-Saver Timeout Configure the number of seconds to wait after a period of inactivity (that is, no keyboard or mouse action) before the client puts its attached displays into low power mode. Valid values are 10 to 9999, or use 0 to disable the feature.

This timeout only applies when the device is not in session.
Display Suspend Timeout Configure the number of seconds to wait after a period of inactivity (that is, no keyboard or mouse action) before the client puts its attached displays into low power mode. Valid values are 10 to 14400 seconds, or use 0 to disable the feature.

This timeout only applies when the device is in session.

When connected to a workstation, this feature requires you to enable the local mouse and keyboard feature. For more information about this feature and instructions on how to enable it, see the PCoIP® Host Software for Windows User Guide.
Auto Power-Off Timeout Configure the number of seconds to wait after a period of inactivity (that is, no keyboard or mouse action) before the client powers down. Valid values are 60 to 28800 seconds, or use 0 to disable the power down.

Non-zero values are only enabled when the Tera2 PCoIP Zero Client supports powering off.

This timeout only applies when the device is not in session.
Remote Host Power Control Configure the client’s remote power setting.

Select from the following options:
  • Power-off not permitted: Users can't remotely shut down the host PC from the Tera2 PCoIP Zero Client. When you select this option, the Zero Client Control Panel overlay window doesn't appear when you press the Tera2 PCoIP Zero Client’s Connect/Disconnect button.
  • Hard Power-off only: Users are able to remotely shut down the host from the Tera2 PCoIP Zero Client. When this option is selected, the Zero Client Control Panel overlay window appears when you press the Tera2 PCoIP Zero Client’s Connect/Disconnect button.
Power On After Power Loss When enabled, the client automatically powers back on when power is supplied.
Enable Wake-on-USB When enabled, configures the client to power up when the user presses a key on the keyboard. Wake-on-USB applies when the client is either powered off automatically or as a result of the user holding down the power button.

Clicking or moving the mouse won't power up the client when this feature is enabled.
Enable Wake-on-LAN When enabled, configures the client to wake up from a low power state when it receives Wake-on-LAN magic packets.

To configure power settings and permissions:

  1. Open the Power page:
    • From the OSD, select Options > Configuration > Power.
    • From the AWI, select Configuration > Power.
  2. Update the power settings.
  3. To save your updates, click OK from the OSD, or click Apply from the AWI.