Skip to content

Support for Moving Devices Between SIPR/NIPR & Insecure Networks

There are specific regulations applicable when moving devices between SIPR, NIPR, and insecure networks, with a goal of preventing data from one type of network from being transferred to a different type of network. In such scenario, there are certain steps the user/administrator must take when transferring a Trusted Zero Client from a SIPR network to NIPR or to an insecure network or vice versa.

Instructions for moving Trusted Zero Clients bettwen networks is available in the topic entitled "Support for Moving Devices Between SIPR/NIPR & Insecure Networks" in the Trust Center Guide.

Migrating Networks

When re-commissioning a Trusted Zero Client to be used on a SIPR or NIPR network, moving between SIPR and NIPR, or moving the Trusted Zero Client to an insecure network, local data and configuration must be removed from the Trusted Zero Client.

  1. Unplug the Trusted Zero Client from the network (or deactivate wireless if configured).
  2. Perform a factory reset of the Trusted Zero Client (Settings → Advanced → Reset in the client interface).
  3. If reconnecting the Trusted Zero Client to the same Trust Center, but on a different network type, remove any configuration for the Trusted Zero Client from the current Trust Center.
  4. Power off the Trusted Zero Client.
  5. Make sure the Trusted Zero Client remains powered off while moving between networks.
  6. Connect the Trusted Zero Client to the new network and power it on.
  7. Register the Trusted Zero Client with Trust Center on the new network.