Understanding HP Anyware Copy/Paste Feature
What is the Clipboard Plugin? The clipboard plugin performs clipboard redirection in the background that allows a user to copy and paste text and images from a client to a host and vice versa over a PCoIP session. This allows the user to efficiently work …
What registry keys are required to make the Imprivata tap-in / tap-out functionality work with PCoIP Zero Clients?
Answer: If the Imprivata OneSign agent has been installed and a user cannot tap-in / tap-out, they should confirm if the registry key has been changed to enable this functionality. To do this the  RedirectionSupported registry key data value must be set …
Certificate management for PCoIP Zero Clients and PCoIP Remote Workstation Cards
This article provides a high level overview of certificate management for PCoIP Zero Clients and PCoIP Remote Workstation Cards (also known as PCoIP host cards). Note: PCoIP Zero Clients and PCoIP Remote Workstation Cards are highly secure devices and by …
How do I find the IP address of my newly installed PCoIP Zero Client or PCoIP Remote Workstation card?
Answer: You can determine the IP address associated with your device using one of the following methods: Before you begin, write down the MAC address of the device you want to determine the IP address of. For most of these methods, the MAC address is …
How do I check for packet loss on the ESX interface?
If there is packet loss on a PCoIP protocol session, but an analysis of network devices in the path show no loss and they have been properly configured (see  Network session checklist for PCoIP protocol LAN and WAN deployments ) then you may want to …
What are the network maximum transmission unit (MTU) requirements for PCoIP?
PCoIP maximum transmission unit (MTU) Requirements Every network has a MTU that dictates the maximum size a individual network packet can be for transmission. If the packet is larger than the MTU it will be fragmented and sent as multiple packets or …
How to identify which USB port on my PCoIP Zero Client is behind an integrated/internal USB hub?
Scenario In some cases a user will plug a USB device into a port on a PCoIP Zero Client and the device will fail or not work as expected. This is caused when a USB hub is used between the USB peripheral and the PCoIP Zero Client root hub. This is not …