Do PCoIP Zero Clients support VLAN tagging?
HP Anyware PCoIP Zero Clients do not support VLAN tagging. If an environment requires VLAN tagging, tagging will need to be performed on a network device's (switch / router) through configuration as as placing the port in access mode and tagging the …
PCoIP Brokered Connections
After completing this unit, you’ll be able to: Understand the need to use brokered connection Understand the requirement for using a Connection Manager and Security Gateway 15 mins   PCoIP Brokered Connections   PCoIP supports managed connections using a …
Will out of order packets impact a PCoIP session?
PCoIP will work when packets are becoming out of order between the two PCoIP endpoints. Re-ordering packets on PCoIP endpoints requires that packets are held in a queue/buffer while waiting to receive the packets that need to be put back into order.  With …
In VMware Horizon View, what does it mean when a particular USB issue happens on both the VMware View client and the PCoIP Zero Client?
Answer: If a USB peripheral has the same issue on both PCoIP Zero Clients and VMware View clients (repurposed PC, notebook or thin client running the View Client), it's likely that the issue is in the VMware virtual USB hub driver, or is an issue with …
Profile application to Remote Workstation Card fails
Scenario : The remote workstation card is at a factory default. You set a basic Profile in the management console and apply the Profile. The Profile application fails. If you check the management console, there is no clue as to why the Profile failed. If …
When using Management Console 3.0.0 I am not able to manage zero clients?
Impacts:   PCoIP Management Console 3.0.0 Scenario: When migrating from Management Console 2.x to Management Console 3.0.0 many zero clients fail to connect to the management console. If the management console is power cycled the zero clients are now able …
Cannot import profile from Management Console 1.x into the PCoIP Management Console 2.x or 3.x
Answer : Importing Profiles from MC 1.x into MC 2.x is supported and documented in the user guide. Refer to the Administrators' guide for the release of the PCoIP Management Console in use. There have been a couple reports of users experiencing an issue …