Why is USB not working when connecting a PCoIP Zero Client to a PCoIP Remote Workstation Card?
By default, all USB devices are bridged to the host with the PCoIP Remote Workstation Card and is dependent on the host OS. Please verify the following Make sure the USB devices are not unauthorized in the PCoIP Remote Workstation Card or PCoIP Zero …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card Zero Clients
Last modified: September 3, 2023
1413
Why is the mouse pointer no longer visible when you bridge a pointer device on a PCoIP Zero Client?
Problem When using Teradici firmware version 4.5.1 and newer, after bridging the pointer device, the pointer is no longer visible on screen. Note: This does not apply to a connection to a PCoIP Remote Workstation Card.   Cause Firmware 4.5.1 and newer …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 20, 2023
1398
Why do I hear pops and crackles or dead air in my PCoIP session when connecting with a PCoIP Zero Client?
This article refers to the audio playback using the PCoIP Analog Audio Data Channel from a host machine to a PCoIP Zero Client. It does not apply to microphone input from a PCoIP Zero Client to a VM.   Problem The PCoIP Zero Client must have either an …
Knowledge Base Article Troubleshooting Performance Zero Clients
Last modified: December 20, 2023
1381
Do PCoIP Zero Clients support USB devices with a visible cursor, such as slate and scribe tablets when bridged to VMware Horizon View?
PCoIP Zero Clients support usb devices ( slate/scribe/pen tablets etc. ) but further configuration may be required. Scenario After connecting your device you can use the tablet for basic cursor movement and mouse click operations just like a regular …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 3, 2023
1267
Why can I not see the mouse cursor when using PCoIP HP Anyware installed on Windows 8.1 or Windows 10 bare metal?
Problem When using PCoIP HP Anyware to connect to Windows 10 running on bare metal (operating system installed directly on the computer with no virtualization), the cursor is not visible.   Cause When Windows 10 do not detect a locally attached mouse, …
Knowledge Base Article Troubleshooting Display HP Anyware
Last modified: September 21, 2023
1253
HP Anyware Manager Administrator interface gives an error 502 - Web server received an invalid response while acting as a gateway or proxy server.
Problem When trying to access the management interface of the HP Anyware Manager, you receive the following error: Server Error 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you …
Knowledge Base Article Troubleshooting Management HP Anyware
Last modified: September 15, 2023
1250