Search

What should I consider when using Network Emulation to Simulate a WAN Network?

Network Emulation Simulation Considerations While network emulation tools can be useful to test PCoIP protocol performance over simulated WAN networks by limiting network bandwidth, injected latency and packet loss etc, we recommend not using the packet …

What type of slot is required to install a PCoIP Remote Workstation Card?

A PCoIP Remote Workstation Card can be inserted into a PCIe x1, x4, x8, or x16 slot. Be sure that the host PC/workstation has a spare PCIe slot and that the PCoIP Remote Workstation Card is properly inserted into a PCIe slot, not a PCI slot. Note: In …

What types of USB devices are supported in Linux with the PCoIP Remote Workstation Card?

The Tera2 PCoIP Remote Workstation Card presents a Open Host Controller Interface (OHCI) and Enhanced Host Controller Interface (EHCI), supporting the USB 1.0 and USB 2.0 specifications respectively, via the PCIe 1x connector to the motherboard. If is up …

What USB CD/DVD drives should I consider using with PCoIP Zero Clients?

Teradici does not maintain a list of tested units. With the introduction of EHCI (USB 2) functionality, compatibility with currently manufactured DVD brands has improved greatly, particularly when the PCoIP Zero Client or PCoIP Remote Workstation Card …

What virtual channels are currently supported by PCoIP Zero Clients?

Listed below, are the 2 VC's (virtual channel) currently supported. Between VMware Horizon View and PCoIP Zero Client OneSign: The virtual channel name is IMP1166 , which was selected by Imprivata. It is used to relay prox card events from the virtual …

Knowledge Base Article Advisory HP Anyware Zero Clients

Last modified: September 21, 2023

778

When are PCoIP session statistics reset on a PCoIP Zero Client?

Session statistics are reset at the start of each PCoIP session, i.e. when a session is connected. You can also reset them during a session through the AWI under Diagnostics, Session Statistics, Reset Statistics. … When are PCoIP session statistics …

Which PCoIP Zero Clients are VMware Ready certified?

For a list of VMware Ready certified PCoIP Zero Clients see VMware View HCL . Note: PCoIP Zero Clients can be identified by ThreadX in the OS Version column. For a complete list of PCoIP Zero Clients, see the HP web site . … Which PCoIP Zero Clients are …

Which PCoIP Zero Clients support wake-on-LAN?

Answer: All Tera2 PCoIP Zero Clients support wake-on-LAN, otherwise known as 'WOL,' to turn on PCoIP Zero Clients remotely. To configure, a 3rd party WOL utility software is required to generate WOL packets to send to PCoIP Zero Clients. Also, WOL must be …

Knowledge Base Article Advisory Setup Zero Clients

Last modified: January 19, 2023

1277

Why are my Endpoint counts under Grouped and Ungrouped not adding up?

This issue shows up randomly on some versions of the PCoIP Management Console 3.x (MC 3.x) and we have not been able to root cause the issue. When you look at the MC Endpoints page you may see a screen similar to the one below. In the above screen shot I …

Why are some resolutions not available in the OSD but are listed as available in the PCoIP Zero Client Administrator's Guide?

This article is applicable to PCoIP Zero Clients that have DVI ports. To see all the supported resolutions in the OSD as listed in the PCoIP Zero Client Administrators' Guide ( GUI Reference > Configuring OSD Display Settings > OSD Dual-display: Display …

Knowledge Base Article Advisory Display Zero Clients

Last modified: September 3, 2023

151

Search

Type

Product

Publish Date