How do I change the FQDN (Fully Qualified Domain Name) of a PCoIP Zero Client?
First, change the PCoIP name to a new name. Currently, the "PCoIP Device Name" can only be changed on an individual basis in two locations: The  "OSD--> Configuration--> Label"  tab The  "AWI--> Configuration--> Label"  tab The default format is  …
Knowledge Base Article Advisory Management Management Console Zero Clients
Last modified: September 3, 2023
432
What types of USB devices are supported in Linux with the PCoIP Remote Workstation Card?
The Tera2 PCoIP Remote Workstation Card presents a Open Host Controller Interface (OHCI) and Enhanced Host Controller Interface (EHCI), supporting the USB 1.0 and USB 2.0 specifications respectively, via the PCIe 1x connector to the motherboard. If is up …
Knowledge Base Article Advisory Peripheral Devices Remote Workstation Card
Last modified: August 2, 2023
434
Why can I use my cell phone to transfer files when I have blocked all mass storage devices through the Unauthorized Devices table?
There are 3 ways to transfer data to USB devices. Mass storage devices (flash drives, DVD), all file types Photo Transfer Protocol - PTP - still image capture device class for cameras, (pictures). Media Transport Protocol - MTP - (smartphones), all file …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: November 17, 2022
432
Why is Adobe Flash choppy with VMware Horizon View and PCoIP Zero Clients?
Answer: Note: This article only applies to VMware Horizon View desktops that do not have physical GPU acceleration. To optimize the performance of Flash, ensure that the Flash player has hardware acceleration turned off: Right click on the Flash window …
Knowledge Base Article Troubleshooting Performance Zero Clients
Last modified: December 9, 2022
433
After upgrading Windows, why can I no longer wake my PCoIP Remote Workstation Card host from the PCoIP Zero Client?
Wake-on-LAN behaviour changed from Windows 7 to Windows 8, 8.1 and 10, preventing the PCoIP Zero Client from waking the host PC if the PCoIP Zero Client was configured to send the WoL packet to the host PC NIC and not the PCoIP Remote Workstation Card. …
Knowledge Base Article Troubleshooting Remote Workstation Card Zero Clients
Last modified: September 19, 2023
429
Can I enable NTP time on a PCoIP Zero Client or PCoIP Remote Workstation Card using DHCP options?
Answer: Yes. NTP time servers can be added to DHCP options 042 based on IP scope or as a default for all IP scopes. It is important to note that this feature may impact setting the time server by the PCoIP Management Console Profile or the Administrator …
Knowledge Base Article Advisory Remote Workstation Card Zero Clients
Last modified: September 12, 2023
427
Reverting to Legacy Certificates after changing the PCoIP Management Console 2.x and 3.x certificate causes the web interface to fail to load
Problem The certificate of the PCoIP Management Console has been updated but the web interface now fails to load.   Cause After uploading the new certificate to the PCoIP Management Console, if your any reason that certificate is not supported, the web …
Knowledge Base Article Troubleshooting Security Management Console
Last modified: November 9, 2022
416
In VMware Horizon View, what does it mean when a particular USB issue happens on both the VMware View client and the PCoIP Zero Client?
Answer: If a USB peripheral has the same issue on both PCoIP Zero Clients and VMware View clients (repurposed PC, notebook or thin client running the View Client), it's likely that the issue is in the VMware virtual USB hub driver, or is an issue with …
Knowledge Base Article Troubleshooting Peripheral Devices Third Party Enhancements Zero Clients
Last modified: September 3, 2023
416