Is it possible to configure the PCoIP Zero Client or PCoIP Remote Workstation Card device name via the hostname option on my DHCP server?
Answer: No you cannot name devices via DHCP, but you can pass your hostname from your PCoIP device to the DHCP server. PCoIP Zero Clients or PCoIP Remote Workstation Cards will pass DHCP options 12 (hostname) and option 15 (domain name) to the DHCP …
Why does my PCoIP Remote Workstation hibernate or sleep and not power off remotely from my Tera 2 PCoIP Zero Client?
When a PCoIP Zero Client attempts to power down a Windows 7 or Windows 10 workstation host during a PCoIP session, the workstation may enter the sleep state rather than being shutdown. This will occur if Windows is configured to map the PC power button to …
Which PCoIP products support Wacom devices?
Wacom devices are supported by PCoIP using 2 different connection methods. Each connection method has it's pros and cons and the most suitable should be selected for your scenario.   Bridged USB device When using the Wacom device as a bridged USB device, …
What does "IPC: Frame encode took xxx ms so far. Dropping down the quality to index x." in the log files indicate?
Answer: In this case, the imaging encoder has determined that too many bits were being sent in the upper portion of the frame (i.e. flooding) which causes the frame to take longer to encode, and therefore appears unresponsive to the user (> 750 ms to …
PCoIP TROUBLESHOOTING STEPS: IEEE 802.1x Network Authentication
This article provides a brief list of troubleshooting steps for common issues with 802.1x authentication. It is not intended to be a comprehensive troubleshooting guide. These include scenarios for: Problems uploading IEEE 802.1x certificates to PCoIP …